Hello, I like to understand how electronic devices work, right now I'm trying to fix one of my laptops, and in the process of looking for schematics and ideas I found this amazing forum
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Comment
-
Sure, here's an introduction for Adel on Badcaps:
Hello everyone,
I'm excited to introduce myself to this fantastic community. My name is Adel, and I'm thrilled to be here. I've been passionate about electronics and computing for as long as I can remember. My journey began with a fascination for how things work, which naturally led me to delve into the intricate world of capacitors and circuit boards.
Over the years, I've amassed a fair bit of experience tinkering with various devices, from vintage radios to modern PCs. I've developed a keen interest in diagnosing and repairing hardware issues, especially those pesky bad capacitors that can cause so much trouble.
I'm here to learn from all of you, share my own experiences, and hopefully contribute to the community with any knowledge I can offer. Looking forward to engaging discussions and fruitful collaborations.
Cheers, Adel
Comment
-
-
Hi my name is Frank I am fascinated about technology still learning it gives me great comfort and joy learning from others.Comment
-
Olá, minha residência é no Brasil, sou Analista, Desenvolvedor de sitemas e Técnico em Informática, comecei muito cedo deste dos 14 anos e sigo trabalhando nessa área até hoje, sempre buscando conhecimento, por isso estou aqui nesse fórum. Muito ObrigadoComment
-
Hey there! Hope you are having a wonderful day! 😊
Well I go by the name NotMoltus online (no, that's not my real name 😅 ),
Origin story of name: "Moltus" is "Great" in Latin,
so Not(the)Greatest person (well, not yet 😉).
I am a Electronics graduate who has had
'a particular interest' in how systems and electronics work, 👨💻
but that diminished due to my laziness. 😞
I am here,
to fire up the old engine (that is my mind),
and get going to get good at
tinkering and hacking electronics. 😜
(ik the word 'hack' has lost its glory)
Thank you for spending your precious time to get to know about me,
I would love to know about you too,
Hop on and send a message, i'm glad to respond 💚
NotMoltus
Comment
-
-
-
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment