Hello my friends. thanks a lot for this forum, this is very interesting
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hi all, nice to be here :-)
My current hobby is repairing GPUs and motherboards, and I find this forum as a very interesting source of information.
Usually I don't have many things to contribute, but I'll post something about iRog chips thay might help others. I hope you like it.
Many thanks!
Comment
-
Hello, new member intro looking to make a long-winded post looking for help with an ancient LCD display (Viewsonic VP230mb). I found this forum after attempts at my regular retro sites (atariage, reddit, maker pro, etc) came up empty. Found users here answering questions I would like to ask... wish me luck!Comment
-
Hi from Italy
My interest is repair game consoles and PCs. I have "decent" success and I would like to learn something new everyday and improve my knowledge
Ciao a tuttiComment
-
Hey all, I'm joining in the hope that someone can help me with my broken Thinkpad! But I might stick around since this is such a cool community. I'm from the Netherlands and gonna be looking for an engineering internship soon..Comment
-
-
-
Hello, my name is Udin, I am 30 years old and from Indonesia.
I am very happy to see this healthy forum. My purpose in joining this forum is to gain knowledge about repairing GPUs and other components. I feel like I have been cheated by a repair technician and ended up spending quite a lot of money, even though I said I didn't have much money, and the repairs did not yield any results.āComment
-
hi, im trying to modify my laptop mainboard by firstly doing some research if its possible or not and turns out it is, i just stumble upon this forum by searching for my laptop mainboard schematics and noticed how friendly and cooperative everyone are and how each question have their desired response and suggestion, i inspire to become a pragmatist in every useful language that still compatible in our standard technologies, im new to this field so i hope ill learned a lot on the way, thanks for creating this forum.
Sierra.Last edited by Sierra-001A; 05-20-2024, 01:01 AM.Comment
-
大家儽ļ¼
ęęÆåē±³ļ¼ä¾čŖč·čļ¼ęęÆäøåęč”äŗŗć
ęå¾é«čå å „é裔ćComment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment