Hello! I am Juan! I'm from Brazil and i'm happy to be here. Thanks!
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
My name is Sawsa, and I'm thrilled to join the BadCaps forum. As a technician specializing in car diagnosis, I've always been passionate about unraveling the complexities of automotive systems. From troubleshooting engine issues to fine-tuning performance, I find immense satisfaction in the meticulous process of diagnosing and repairing vehicles.
In addition to my expertise in automotive diagnostics, I'm also deeply intrigued by the world of smart TVs. I have a keen interest in learning how to repair them effectively. I believe that the skills and knowledge I acquire in this forum will not only enhance my proficiency in car diagnostics but also broaden my horizons to encompass the realm of consumer electronics.
I look forward to engaging with fellow members, sharing insights, and embarking on this journey of continuous learning and growth together.
Comment
-
Greetings to all! I'm Evgeniy. I've been repairing electronics for over 25 years! Glad I found your forum!Comment
-
Hi All!
I am 25, English and have lived in Indonesia
Have been employed at a IT company atleast 2 years. my experience on network devices such as cisco/mikrotik/fortinet, make an installation on sites and doing some config for example routing, vpn, remote access
Currently i am struggling with cloud things (azure especially). still learning and hope soon can switched as cloud engineer
Thanks
Comment
-
Wat up peeps. So happy I found this forum. Have a few gpu projects I have been waiting to start looking for resources, which is how I got here. I am a hobbyest but started working on boards at around 12 w/o. Now 40. Have encouraged my son into it and he has been doing robotics, 3d printing, Raspberry Pi, etc. I got it from my father who is engineer at SpaceX. I have done mostly small electronics repair like gaming systems, cell phones, hoverboards, etc. Really just getting into computer hardware with gpus, which seem pretty challenging, but looking forward to diving in.Comment
-
My name is Jeferson Lobo, but I call myself "MestreeBR" because I want to understand everything a little so I'm like a master wizard, my passion is for software and I'm studying game development at the moment, but I've learned a lot about the hardware side too, I'm Brazilian and I'm trying to learn English and work outside my country, I'm 29 years old and I love geek culture and that's it for now, thank you for accepting meComment
-
Hi am Charles, I've been having a problem with some of my clients who have put Bios Passwords and forgotten them. Requesting for assistance my Service Tag is D7KWKW2. Thanks in AdvanceComment
-
My name is ossai chukwunaru Michael I'm from Nigeria I am new to computer repair and maintenance, so I'm here to learn to add more to my skills I just wish everybody here will be friendly with me and I need somebody to put me through on the laptop repair and maintenance I really need to learn it thank you very muchComment
-
-
Hi all. My name is Mike Boysen and I've been a technology geek since the mid-80s. Today I'm an innovation consultant and of course, a number of my clients are in the software space. So, I like to stay informedComment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment