Trabalho com eletrônica em geral desde 1982. Agora migrando para área de Notebooks e desktops.
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hello.
My name is Eric. I was born in France and I am a computer and electronics lover.
Thank you for this forum which I hope will allow me to troubleshoot computers.
Comment
-
-
-
Hello badcaps community.
I'm here for learning.
Found this forum after research for my little project.
My knowledge of electronics is very little but i try to learn a bit at a time.
Would love to learn how to read and understand schematics for mainboards etc in the long run.
Thank you.
Comment
-
hi everyone! just i arrived here, hoping to learn. Fixing tech is my hobby, and sometimes obsession. I'm not the most social person but i will try my best to contribute 🤗Comment
-
Hello my names Lukas.
I’ve been interested in the engineering field for quite some trying to find out how my computer works. During lectures you talk about how things work at a very high level view. I like that view because it leads to a lot of questions things I can ask and learn but there is still so much that I haven’t figured out.
Thanks for being such badasses everyone.Comment
-
Hello, I'm Bruno.
I'm trying to fix my laptop and found this forum. I hope to help this forum in the future.Comment
-
-
Hello, my name is Florin and I am an electronics enthusiast. I hope it will help one day. Thank you very much for accepting me in your group.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment