Hi, im new and want to learn all i can learn. German based
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
-
Hi All, Dave here,
BSc Mechatronics engineer with 25 years in the industry, into to collecting vintage computers, consoles 104 in all now and only 4 repeats, and lots of calculators ( the first computers) lost count how many, anything thing from the commadore PET 2001 to the XBOX 360 repair and restore, not interested in anything after 2009 in my collection, but more than happy to fix the new stuff if required, main hobby is collecting hobbies. Main job is training electronic technicians.
Hopefully I can maybe learn something new and help others,
Thank you,Comment
-
buongiorno a tutti, sono Adriano appassionato per l'elettronicaLast edited by adriano quercia; 12-08-2023, 05:29 AM.Comment
-
-
Hi everyone, I'm Demetrio and I write from Italy, I love IT and electronic repairs and I'm always hungry to learn new things from competent people, a friend of mine recommended this forum to me, I find it very interesting and full of exciting content .Comment
-
Hi everyone
Marcel here. Based in a small repair shop in Ireland. Im glad to be a part of this fine forum and will try to be a good member.
Also I would like to say big Thank You to everyone who is sharing information and knowledge on this forum and within repair techs community in general.
best of luckComment
-
-
-
Hi, sorry if I introduced myself in italian, I greet you but i don't know the inglish language well, I'll try again hoping not to make a mistake in writing my name is Ernesto and I live in Italy in the province of Milan, I have a passion for electronics and when it happens I like to try my hand at repairing some computers or other electronic devices, I came across this site by chance and found it interesting and so I decided to be part of it obviously if that's okay with you.Comment
-
Hi Everyone, I'm an Owner/Operator of a phone repair shop in Michigan. I have a fairly large background of repairing all kinds of electronics since I was a junior in highschool, I've even had the pleasure of attending Jessa's micro soldering course in New York through iPad Rehab in 2017 and have been working on board level repairs ever since.Comment
-
Hello all
let me introduce myself, my name is Ari
I come from Indonesia,
My job is a laptop repairman,
it's an honor to be here...
please guide
and thank you​Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment