New Members - please post your introductions here

[swampy]

Re: New Members - please post your introductions here

Hi badCappers my name is swampy and im a diy fix it if i can.
Im from the uk and love soldering and making custom pc cases.
I joined the forum so i could get help in fixing a lcd monitor i had given to me but also there is so much to be learned from all you good people.
Knowledge is power

[alainski]

Re: New Members - please post your introductions here

Alainski here from downtown Los Angeles.
After years of cubicle Service Desk gig, I'm re-kindling the bench techician in me on the side.
Revived 2 mobos, 3 monitors and an XBox 360 in the last 60 days....
Time to visit my friends at the local office machine recycler.

Great forum and lots of helpful folks.
Thank you,

[MegaComputerClinic]

Re: New Members - please post your introductions here

hi am i new here and i am just here to find info about how to fix differant monitors and that is all i will be comming here for and i hope i can find the information i am needing here with maybe some help if i need some

[tschanuka]

Introduction tschanuka

Hi guys,

my name is Sven from germany and I am an IT systems electronics specialist (translated from german).
I am running a laptop repair business specialized in chip level repair (like changing GPU, north, south, short circuits etc.) for about a year now.
Before that I was working a few years as a laptop tech for an IT broker.

There are still many things to learn...and sure learning will never stop.
I am glad I found this forum because it is english speaking and the community seems to be nice. Normally I read in popular russian and polish forums but my language knowledge is not that good to participate on discussions. Hope my english is good enough to do so here.

So that´s it from me. See you guys.

[aduntoredas]

good day to you all

I'm a Romanian network and systems' engineer in the mid 20's, whose first encounter with microcomputers dates to kindergarten, when I used to write small chunks of BASIC code on a HC'85 (a Romanian equivalent to a Commodore 64, produced in Romania with French support and using a Zilog Z80 CPU). Those were the days.
I've been tinkering with IBM PC compatible computers since my first second hand 386SX/20, I'm keen on solving hardware as well as software issues and had some experience with electronic DIY devices (I used to put together all kinds of electronic gadgets with my soldering iron). I got a master's degree in Advanced Software Engineering and I used to be a pretty good software coder in college.
I'm currently looking for a country closer to the Greenwitch Meridian )

Anything I can do to help you in my areas of expertise feel free to ask.

[bodaciuos]

Re: New Members - please post your introductions here

hi all happy to be a part of this community.. im a noob .. willing to learn.. thanks for having me..

[yrdbrd1]

Re: New Members - please post your introductions here

Hi all,
Name is Bryan, live in Clearwater Beach, FL. I have been an electrician for 25yrs, but got into computers in the late 80's. I have mostly been building and repairing PC's for the past 15 years, but still dable with the high voltage . My hobby is torrenting hahaha arrhhh matey!! Nice to be here in the community.

[Mrlinshadowdale]

Re: New Members - please post your introductions here

Hi,

My name is Mike, I'm 25 years old. I graduated from Marquette University with a BS in Computer and Electrical Engineering. I'm currently working as a hardware design engineer for a company that designs cockpit upgrades for aircraft displays.

[marlonbicol]

Re: New Members - please post your introductions here

hi Guys, I' new in this forum..a little intro about my self.. I'm a tv technician here in the Philippines..46 yrs old. I hope ican share my repair experience also.. regards...

[markczarn]

Re: New Members - please post your introductions here

Hi, everyone!
Name's Mark. Used to be a computer tech for the local (I'm in
Venezuela) reps of DEC; this was when one could fix to component
level. I even had a soldering iron in my toolkit!!
I hope to enjoy and learn a lot in this forum.
Regards

[donfishy]

Re: New Members - please post your introductions here

Hello everyone, I'm here because i was reading the troubleshooting guides for the "2 seconds to black" issue, i wanted to view some of the pictures so i registered.

[fleetwise]

Re: New Members - please post your introductions here

Hello everyone, My name is Gary. I have played with electronics at a basic hobbiest level so I always have plenty of questions.

[zzyplza]

Re: New Members - please post your introductions here

Hi my name is Chris and i'm based in Newcastle, New South Wales.

I joined because i have a FSP048-3PI01 power supply in my LCD display that's dead. I replaced the 470uF and 1000uF caps but that didn't do the trick.

[Raul]

Re: New Members - please post your introductions here

Hi, My name is Raul and I'm new to fixing computers, I have a Dell Dimension 8400 that has opened a can of worms. Appreciate all the great info and help here.

[dnevill]

Re: New Members - please post your introductions here

I've been a long time computer guru on the software side of things, but my component-level repair skills are still pretty mediocre. I'm another victim of the short-lived Samsung SyncMaster 226, and came across this forum as I tried to find appropriate part numbers for the failing caps (in this thread https://www.badcaps.net/forum/showthread.php?t=7900 )

[flyby50]

Re: hello everyone

name is flyby50 and I love working on electronics and computers.
however i'm in the need of information on spectroniq 3250 service manual is ther any help out there thanks flyby50

[orbanp]

Re: New Members - please post your introductions here

Hello Everyone,

I just joined this forum! Nice to find a place where people actually want to repair something instead of throwing it out!
I am an EE and like to repair electronic and mechanical things.
Hope gain knowledge and contribute by participating on this board.

Regards, Peter

[janusz404886]

Hi there everyone.

I just enter in this particular discussion board community and would like to say hi there to everybody.

[deki_mg]

Re: New Members - please post your introductions here

Hi folks,
I'm student of Electrical enigineering (Electronics dept.)
I love soldering and building hobby projects, also I can repair a thing or two.
Joined because people here know what they are doing, and they seem willing to help.

Best regards.
Deki

[nosrom1967]

Re: New Members - please post your introductions here

Just wanted to say what a informative site !