Hello, I;m Arek, I'm software developer but i'm interestaed in electronics and it is may hobby. Sometimes I'm building some electronic stuff or repair something.
Best regards.
Best regards.
-
-
Hello Guardians, I am Zavala and thanks to the wonderful humidity of the Gulf Coast, I've found my way here trying to find the service guide for the Zephyrus Duo 16. The Vanguard appreciates this forum's assistance.
BestComment
-
bonjour à tous,
je suis un technicien à la retraite, et j'adore bidouiller les PC et toute autre chose qui s'en rapproche, et la je suis sur un HP Probook 440 G9 qui est bloqué par un MP sur le Bios, et en faisant des recherches, je suis tombé sur votre forum, et celui ci a l'aire d'avoir une bonne étique en ce qui concerne l'aide pour pouvoir avancer et toute cordialité et c'est cela qui m'a plus.
TeacmanComment
-
please help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you -
please help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
please help friends x1 yoga 7th no display beep melody thank you...
-
please help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Please help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic
Comment