Hello, my name is Stephane and I am located in France
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hi folks,
I'm Colin from NZ. I discovered this site whilst searching for a laptop schematic.
I'm currently 65; I started my career in electronics and computers with the Royal NZ Air Force back in '78 and working primarily on test equipment calibration, verification, & repair.
Of recent I've re-kindled a love of component level board repair and Arduino projects.
I look forward to participating on this fine site.
Cheers,
ColinComment
-
Hi found your site by watching Learn Electronics YouTube videos. I’ve worked with electronics since I was 7yrs old! I did 3yrs VOTECT in electronics, digital electronics. I served on Fast Attack Subs in the USN 6yrs as a STS2(SS) SONAR technician and advanced electronics technician.
I’ve done a lot work in computers, from designing and build to software development.
I come here looking for Schematics. It is amazing how difficult it is to find schematics for things like a car radio!
it used to if you needed to fix something you’d goto Sam’s photofacts and order a schematics that would walk you through everything.
I have a 2005 Honda LX which Radio/cd player has no audio, the design of the system combines to climate control with the radio interface. Just to set it up on the bench is quite the challenge.Comment
-
thanksAs this is a brand new forum, I thought I'd open up a thread to encourage new members to introduce themselves a bit.. now hey.. let's not get too personal.. ok ?
And if you wouldn't mind to keep this thread "clean" let's try to keep the the chitchat (i.e. even the welcome to the board replies) to a minimum or this thread may get to 100 pages fast
So I'll start things off :
My name is petabyte and I'm a forum junkie. :oops:
I've been off the wagon for a number of years and countless times I've tried to stop but it's useless.. I need to feed my learning addiction.. :!:
Now just a bit about me.. I'm a fairly secretive guy in terms of privacy on the net.. especially when the things you write are visable to anyone with a net connection. But I love to share the info and knowledge I have, so that's why I'm here, to share and learn.
my formal education is that of an electronic engineer and I held a field service position with a firm for over 20 years.. that job is gone now along with company car and laptop <cry> oh well..
So needless to say (but i will) I've always tinkered with things.. yes, a hacker.. (too bad that term lost it's orignal meaning) a hardware hacker mostly.. hacking fixes in whatever I find that breaks.. (except for cars, I have friends for that) I got started a little late into the computers, my first box was an ibm pc-xt with a whopping 10meg HD,blazing fast 4.66mhz 8086 processor, 640k mem running dos 3.3.. man was I cool back then.. :roll: nevermind..
so these days, I'm forced to be a software guy as well.. as I fix pc's for friends and that usually means cleaning virus/trojan/adware and reinstalling OS's.. yeah hardware breaks but not that often :cry: so as a result, I keep up on my software knowledge by visting a few security forums.. and trolling around a few hardware forums as well.
now I found this place from a thread at motherboards.org/forums
where I've been hanging out lately.. it's a nice friendly place with some pretty smart people.. mostly, of course, it's about mobo's.. So this person mentioned badcaps.net and I recalled reading articles a year or so ago about the faulty caps and was curious as to what you guys were up to.. and I said "w00t.. they have a forum"..
and so now.. you're stuck with me :P
so what's your story ? come on.. give it up..
Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment