Hello! I just bricked my friend's T480 😬. But I'll figure it out!
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
“I’m just here so I won’t get fined.” 😄
Hey everyone,
I’m joining out of pure curiosity and general interest. I’ve been learning more about electronics lately and thought this place might be a good resource (and community) to dig a bit deeper.
Looking forward to reading, learning, and maybe even contributing at some point.
Cheers from Germany!
Comment
-
Hi all, the names Tim,
I'm 32, living in Cape Town, South Africa
I've always been tinkering with console mods since young, what started off as a curiosity to how things work and why they broke and whether i could fix them or not turned in to a hobby which has lead me to spending an unnecessary( according to the wife) amount of time and money on equipment and broken things trying to repair or understand them better.
My most recent victim is an oled switch where the digitizer is not responding on this one particular board but works fine with another known good board. I hope to be able to pick some brains on here as i slowly go down this rabbit whole on this multilayer board. 🤦♂️Comment
-
hi my name is indra, i'm from surabaya indonesia, i'm beginner at repairing pc or laptop, i hope i can share or get any solution in this forumComment
-
-
Hi everyone,
my name is Christian, 30 from Hamburg, Germany. I am relatively new to the hardware scene but it really hooked me up. I am hoping that I am able to learn a lot and hopefully I can give some useful knowledge as well back.
See you all in the posts
.!Blayz (Christian)Comment
-
Hello, Portuguese engineer here. I like to make sure things are broken, by opening them up, removing and replacing small SMD components and make sure they won't live again. Sometimes I fail.Comment
-
Hi everyone,
I'm Kadhim from Bahrain. I'm passionate about computers, networking, and learning how to repair motherboards. I often work with server hardware and software systems, and I'm always looking to learn more—especially about hardware diagnostics and schematics.
I joined this forum to connect with like-minded people, ask questions, and also share anything I discover. Looking forward to being part of this great community.
Thanks!
Comment
-
Hello,
I am Edward and i have electronics repair as a hobby, i love to work on retro machines.Comment
-
Hi Im Vash.
Beginner in laptop repairs. Nice to be on this forum.
Gday everyone.
Based in Perth WA, AustraliaComment
-
Hello. I have my graphic cards corrupted sometimes but I want to figure it out by myself. And I really love to research about the components. I'm so into it 😁. That's why I want to join the forums for my knowledge. Have a nice day everybody!Comment
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment