Hey everyone, I'm here to resolve some issues I've ran into while getting my laptop serviced
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
Mi presentación.Hola,señores.
Tengo 45 años trabajo con computadoras desde la famosa 586. Trabajé experiencia en el área de electrónica desde hace 5 años para acá. Actualmente soy propietario de mi propia empresa y continuo en el área de servicio técnico.entré en el sector de las tecnologías a través de un programa escolar en una academia privada aquí en mi país, cerca al año 1999, de ahí en adelante surgió el entusiasmo en este mundo.En fin, llevaba casi cuatro años trabajando en el sector de las tecnologías de la información y la comunicación profesional cuando me despidieron.Sigo sin trabajo, pero de vez en cuando trabajo con ordenadores de particulares y voy a intentar entrar en una empresa que se dedique a esto...
Eso es todo (por ahora). Si alguien quiere saber más, que me envíe un mensaje.
Comment
-
-
Hey,
I'm interested in electronics repair, especially graphics cards and computer hardware.
I recently started learning more about board-level repairs and hope to find useful information and maybe also share some of my experiences in the future.
Thank you for having me in the forum!
Comment
-
-
Hi Everyone
My Name is (Farsat) currently 28 years old living in Iraq, and I am fascinated by electronics and electronic repair, ever since I was a kid, I know my fair share when It comes to electronics, however, you can never know everything, so back when I was younger, I started to work half time at a repair shop back in 2011 all the way to 2014 local to where I live, and afterwards stopped electronic repairs ever since, due to School, College and all that.
But lately I have been having thoughts about opening up a repair shop in my local community, and I look forward to guidance and instructions from this community forums, as after checking out the threads and posts that have been made here, it certainly looks like the right place to get information and help if needed, therefore I hope to start very soon in my endeavors and please wish me luck !
Comment
-
-
Bonjour.
Passionné par les nouvelles technologies, je m'intéresse particulièrement aux nanotechnologies et à l'intelligence artificielle. Curieux, rigoureux et autonome, je me forme en continu pour comprendre, expérimenter et anticiper les innovations. Mon objectif : allier progrès technologique, éthique et utilité concrète pour construire un avenir responsable et durable.
Comment
-
-
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment