New Members
Please consider donating to this site if it has helped you. We rely on these donations.
Please also introduce yourself here Introduce yourself here.
And finally, Read the Forum rules here.
I have been working in IT since i was 16 back in the beginning of the 90's. I am still very much active but not in business perspective because of a bad injury. Today i am still building systems for friends and playing around on my special old machines.
hello,,,may i introduce my self....
Im bernardo amos 38 y.o from Philippines...im an gadget technician from my country for 12 years and i would like to discover more knowledge from this forum..
I hope im welcome here
Hi all, I'm a seasoned IT veteran, 30 years in this world of wonder and mystery. I have worked as a systems analyst, network engineer, developer and hardware technician, all areas have left me somewhat confused and bewildered at times but love the feeling you get when you succeed. Have many hobbies including para karting, kite surfing and sailing...and the unclassified tinkering with anything I do not understand...most of my toys as a child were dismantled...some lived. Any questions, please feel free to ask, Thanks.
Hello everyone!
I am a computer technician and I am here because I find this forum really useful and valuable. Thanks for the contribution of each member 😎
Hello I am an ex-soldier, currently working as a public transport controller.
I have been addicted to computers for 30 years.
I like to solve problems myself, but if necessary I am not afraid to ask for help.
I am Jeroen. Currently owning a repair business for over 10m years. Mainly repair of cellphones and simple hardware replacement. But very interested in mainboard repair en trying to learn that.
I hope badcaps can help me learn to repair boards myself.
please help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you
please help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
Please help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
Comment