Hello everyone. I'm Jure and I'm here because I found some useful conversation on this forum.
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
I can't recall if I posted here or not when I initially signed up for the forms.
I am daniel I own & run a mail-in board-level electronics repair shop Called Advanced Device Repair or ADR.
I have 9 years of experience in professional smartphone & computer repair. But nowadays, I work a little bit of everything from usual stuff like phones, laptops, desktops, and consoles to higher skill & niche repairs like: arcade cabinets, AV equipment, car audio amps, and switch mode PSUs to avionics control boards & GPUs.
Given that level of technical expertise yes, I've been lurking on here for years without actually posting.
my company website is www(dot)adr(dot)tech
Comment
-
Hello everyone! I'm a enthusiast on laptops reparations, so this forum is very interesting to meComment
-
-
Hello, I just wanted to introduce myself, I am an electronics enthusiast and I am studying hardware repair on my own. I hope to be useful in the forum.Comment
-
Hello everyone! Its great the community here. I'm a Spanish IT that is getting into electronics repair. I've a toolset from Aliexpress and I've fix my first MBP motherboard. I'm getting not working laptops from friends and relatives and I love to debug a faulty motherboard and fix it.
I hope I can help other with my litte knowlegde.
Thanks to all that were helpful to me!Comment
-
Складання резюме – нелегке завдання, особливо якщо хочеться, щоб воно було професійним, сучасним і, як результат, успішним. З допомогою CVmaker все набагато простіше. З нашими спеціально розробленими шаблонами Вам залишається лише ввести інформацію у відповідні розділи. Але тут виникає логічне питання – що саме писати? Для цього ми підготували кілька зразків хороших резюме, які надихнуть Вас і допоможуть розпочати створення свого резюме. Ви можете завантажувати і використовувати їх для себе!Comment
-
-
Hello evryone
my name is michael i am software technicial in samsung service center that locates in ethiopia thank youComment
-
Greetings and salutations to all, nice to find a resource that's been around almost as long as I haveComment
-
Have been on ths site for many years but somehow my details have gone missing so i have to register again?Comment
-
Hello everyone!
I am Alex and I like to thinker with electronics. I do not work in this field, I am a sysadmin but in the free time I do a lot of soldering and modifying. I found some nice informations on this forum so I joined as well.Comment
-
Hi my name is Jorge AKA DrConsola, I'm just a tech junkie who love repair, I do notebook repairs, and video game consoles. It's a pleasure to be hereComment
-
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment