Bonjour, Je me présente rapidement dans un premier temps. J'ai une petite quarantaine d'année, developpeur web. Je suis un grand fan de musique et de film en tout genre.
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
-
Hi to all, searching for info i stumbled upon this site, which apparently i had found and registered since years ago but didn't bookmarked it. Glad to be here to learn.Comment
-
-
boa noite pessoal, sou novato trabalho a 15 anos no mercado de manutenção de eletronicos, moro no brasil, venho ate voces para adqurir mai conhecimento muito obrigadoComment
-
Hello, I'm not really a hardware repair type of person, but I have recently successfully repaired many different machines, which I was really excited about.
I'm more of a software developer, more specifically for embedded devices, so I think it would go hand in hand with each other.Comment
-
-
I totally understand why and how soft skill can be powerful tool at professional workforce. Yet, when I get into very detailed "geeky" kind of work, I often undervalue the soft skill. How do you balance very technical discussion with soft skill?
As long we keep away the soft skills from our personality. There will be always moments when your true personality is coming out. Until they did not become PART of your personality there will be always moment as you mention. It is like two separate objects { You } && { soft skill }. So you have to become one, my friend!
Comment
-
xin chào tôi là MR. Minh
tôi là kỹ sư phần cứng rất hân hạnh được làm quen và chia sẻ kinh nghiệm với các bạnComment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment