I help homeworkers with issues, thats why i'm sign up here for answers!
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Hi guys,
I am from Melbourne. My daughter tear off his usb c when dropping her laptop. And hence I am here. She had a lenovo L380 with no screen so I wish I can fix it for her .
Nice to meet u and now I wanna get a schematic for the L380 and hope to learn more about fixing laptops.
regards,
bobodadComment
-
Comment
-
-
-
Hello everyone,
I am an IT Technician with a passion for technology and problem-solving. With a strong foundation in both hardware and software, I thrive on ensuring that computer systems run seamlessly. Whether it's troubleshooting an issue, setting up new workstations, or optimizing network performance, I'm dedicated to keeping things running smoothly.
​Comment
-
-
Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment