Hi to all members. My name is Costi from Romania
New Members - please post your introductions here
Collapse
This is a sticky topic.
X
X
-
Chào mọi người.- Tôi tên là Phạm Tất Đạt, đến từ TP.HCM - Việt Nam- Tôi là kỹ thuật viên sửa chữa phần cứng máy tính- Tôi biết đến diễn đàn này nhờ tìm kiếm thông tin. Tôi đánh giá rất cao những lợi ích mà diễn đàn mang lại- Xin chào mọi người một lần nữa.Comment
-
Howdy! I joined to learn more about identifying components and circuit testing. Basically I'm here to learn everything I can about repairing specific automotive electronics to start and hopefully that knowledge will follow on to some consumer electronics. This has been an interest of mine for as long as I can remember. At first it was a curiosity about VHS players and then gaming consoles. Now I have several decades of experience in a few applied sciences fields and I'm turning my attention to electronics repair.Comment
-
Greetings everyone! I'm from Michigan, USA and originally from Poland. I love to tinker with electronics, used to mod Xbox and other consoles back in the day, have been tearing electronics apart for almost 2 decades, always willing to learn or try something new. Fixing, building networks, computers, servers for small businesses as a hobby for well over a decade now. Came to hopefully learn more and fix wife's laptop as someone wanted to be funny and set a random password on her HP 14 G2 and can't simply reset bios :/Comment
-
My introduction time, hello, i`m a pure hardware technician, working for my own independent store in fixing Pc`s and laptops, a father of 2 grown up kids, and how did i start my journey as a hardware thecnician? well it all started during high school, i learnt a bit about computer engineering but did not pursue a job around this field, instead i went to do simple jobs until there was a need to fix my TV, then i kept fixing more electronics for people and i gained more skills and practice till i was decent enough at the job,now i quit my old job and do this for a living. My favorite hobby is watching tik toks, and you`d think only young kids are into tik toks but i find them entertaining and easy to spent a few minutes during toilet hour watching animals being smart, and people being dumb.Comment
-
Hello, my name is Junior Lara from the Dominican Republic, I am dedicated to laptop repair and in this forum I have found a great ally for my technical work.
I hope to continue working and collaborating with you always.Comment
-
Espero tambien los que hablamos espanol podamos colaborar con todos los tecnicos alrededor del mundoComment
-
Re: New Members - please post your introductions here
Hello guys, I am Alex
I am starting in repairs, I want to contribute to this community.Comment
Related Topics
Collapse
-
by fredyjbiplease help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you1 Photo -
by fredyjbiplease help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
PF0002 20v
PQ0005
pin 5 20v
pin 1.2.3 19.8v
pin 4 19.8
resistance
source & drain 2,4 m
source & gate 100k
PQ0006
pin 1.2.3 19.8v
pin 4 19.8v... -
by fredyjbiplease help friends x1 yoga 7th no display beep melody thank you...
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiplease help friends clean me bios x1 yoga 7th no display melody beep, thank you
-
Channel: BIOS Requests ONLY!
-
-
by fredyjbiPlease help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
LINK to Schematic -> https://www.badcaps.net/forum/troubl...b501-schematic - Loading...
- No more items.
Comment