Re: New Members - please post your introductions here
Hey there,
I opened this account because I am currently troubleshooting my Sony KD-75XE9005.
I already read through some threads but I believe I missing someting very basic or my TV really has a very special problem.
Thanks for your support!
Re: New Members - please post your introductions here
Hello everyone, i am new here. I will intruduce myself. My name is Kristof and i am 37 years old. im from belgium. I try to fix things, sometimes i succeed and sometimes i fail but thats the way life go's. you cant always win
Thx fot the acces to the forum i hope we can help eachother because i dont like to trow away electronics with minor defects.
Re: New Members - please post your introductions here
Hi all, Im Luciano from Argentina I have been using this forum always but had never posted before. I love this entire free comunity that helps people fixing problems with their devices.
I fix devices for a living and work in kindergarten as teacher.
Re: New Members - please post your introductions here
Hello, just joined. Came here from HardOCP because I'm working on a computer monitor and wanted to ask a question from those that may have been down this road. 1st post, thanks for the add.
please help friends thinkpad T470 board CT470 series NM-A931 error post "bottom cover tamper detection error"
I've already
flashed the bios clean me and updated from the Lenovo site, then removed the switch and immediately jumped the S3 from pins 1 to 4, 2 to 3 but the problem remained the same, thank you
please help friends, I have 3 T490 units with the same case, the USB type C is completely dead, showing 20v 0 amp, loss of voltage VINT20_IN resistance to ground is fine, thank you
I think the problem is that I lost the voltage at PQ0008 pon 1 -PWRSHUTDOWN which should have been high which was picked up by R9512 VCC3SW, thank you very much for your help
Please help friends, thinkpad t480 nm-b501 is dead, help me fix it, thank you
usb meter 20v 0.00 amp, after I took the VSYS measurement the drop was only `9.2v which should have been 10.2v I measured from a normal matherboard machine, the VSYS path resistance to ground diode mode is 1900 thank you
Comment