Hitachi 58HK6100U LED TV - Sound but No Picture

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • lotas
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Ok, It's better not to do it anymore, the problem is in the panel itself. There are two options, either this or replacing with a new panel.

    Leave a comment:


  • Bloopeta
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Originally posted by lotas
    Well then leave from 2 to 14 inclusive.
    I have.

    Thankyou so much for all your help

    Leave a comment:


  • lotas
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Well then leave from 2 to 14 inclusive.

    Leave a comment:


  • Bloopeta
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Originally posted by lotas
    Try different combinations, where it will be better, and leave it.
    To be honest, I think that is the best its going to get.
    I have tried reducing from 14, one contact at a time, and it doesnt get any better. Anything from 12 or less looses picture

    Leave a comment:


  • lotas
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Try different combinations, where it will be better, and leave it.

    Leave a comment:


  • Bloopeta
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Originally posted by lotas
    Until 19, this is a lot you have glued, from 2 to 9 (inclusive) and up to 14 (inclusive) try
    1 does not need to be isolated, this is VGH, you need it.

    In general, you need to experiment with these contacts, you can achieve a normal picture if you're lucky.
    From 2 to 9 inclusive, lost picture again, white screen with vertical lines

    From 2 to 14 inclusive, I get picture, but with aot of thin black horizontal lines, and a weird patch in bottom left corner
    Attached Files

    Leave a comment:


  • lotas
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Until 19, this is a lot you have glued, from 2 to 9 (inclusive) and up to 14 (inclusive) try
    1 does not need to be isolated, this is VGH, you need it.

    In general, you need to experiment with these contacts, you can achieve a normal picture if you're lucky.
    Last edited by lotas; 09-03-2022, 07:52 AM.

    Leave a comment:


  • Bloopeta
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Originally posted by Bloopeta
    I have tested with multimeter, and have wrote the pin numbers where you have marked on the picture

    So do I cover these numbers on cable with tape?
    Here are the numbers for the pic you sent

    I have covered from 2 to 19, and have picture, although a bit grainy, but no vertcal lines this time
    Attached Files
    Last edited by Bloopeta; 09-03-2022, 07:14 AM.

    Leave a comment:


  • lotas
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Yes, try.

    And what contacts do these points go to.
    Attached Files

    Leave a comment:


  • Bloopeta
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Originally posted by lotas
    First you need to isolate these 9 contacts, these contacts go to the bar, you can check with a multimeter where they go (which pins of the connector.
    I have tested with multimeter, and have wrote the pin numbers where you have marked on the picture

    So do I cover these numbers on cable with tape?
    Attached Files

    Leave a comment:


  • lotas
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    First you need to isolate these 9 contacts, these contacts go to the bar, you can check with a multimeter where they go (which pins of the connector.
    Attached Files

    Leave a comment:


  • Bloopeta
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Originally posted by lotas
    Take a good quality photo of this chip so that you can read the control points near it.
    Pic as requested
    Attached Files

    Leave a comment:


  • lotas
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Take a good quality photo of this chip so that you can read the control points near it.
    Attached Files
    Last edited by lotas; 09-03-2022, 03:27 AM.

    Leave a comment:


  • Bloopeta
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Originally posted by lotas
    Here it is necessary to experiment with these contacts, try both 14 and 15, 16, also try to isolate them in turn ...
    This microcircuit is responsible for these signals, and you have damaged drivers on the one hand, which must be isolated.
    I see, I will try that, thankyou

    Leave a comment:


  • lotas
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Here it is necessary to experiment with these contacts, try both 14 and 15, 16, also try to isolate them in turn ...
    This microcircuit is responsible for these signals, and you have damaged drivers on the one hand, which must be isolated.
    Attached Files
    Last edited by lotas; 09-03-2022, 03:26 AM.

    Leave a comment:


  • Bloopeta
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Its better than it was, but still not quite there
    Attached Files

    Leave a comment:


  • Bloopeta
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Originally posted by lotas
    13 pin.
    Great thanks, I will try that

    Leave a comment:


  • lotas
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    13 pin.

    Leave a comment:


  • Bloopeta
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Originally posted by lotas
    They glued something wrong, the second photo is about how to glue it, but you need to glue (isolate) these contacts.
    Ah I see, I worked from the left, not the right lol

    Ill try again ��
    Last edited by Bloopeta; 09-03-2022, 02:30 AM.

    Leave a comment:


  • lotas
    replied
    Re: Hitachi 58HK6100U LED TV - Sound but No Picture

    Originally posted by Bloopeta
    Have tried that, pics attached.
    They glued something wrong, the second photo is about how to glue it, but you need to glue (isolate) these contacts.
    Attached Files
    Last edited by lotas; 09-03-2022, 02:25 AM.

    Leave a comment:

Related Topics

Collapse

  • iglitare
    Sony KD-75XF9005 grey Picture but Sound. TCON or panel?
    by iglitare
    Hi,

    i want to repair a Sony KD-75XF9005 TV that initially only showed a grey picture.
    Backlight seems to work, Sound (Setup menu after reset) works.
    If i dissconnect the left FFC cable from TCON to panel i have half a screen on the right. If left cable is connected always only the grey screen.
    Interchanged the cables, its always only the right side that is working. Always grey if left side is connected.
    With my small knowledge i would think at least the cables are good.

    Can this happen because of a bad tcon board?
    Or is it always a bad/shorted...
    09-04-2025, 07:13 AM
  • KYBOSH
    Hitachi 55HDS69 55" Plasma TV - No Picture But Sound
    by KYBOSH
    Picked up a bahemoth plasma TV not too long ago and just now getting around to looking at it.
    No picture but you hear the TV static (white noise) playing loud and clear.
    The back was already taken off (and no screws were provided) as the previous owner had already taken a look.
    But it seems they didn't get too far and just left it.

    When I first took a look I was amazed at how pristine the inside looked.
    Its as if the TV had been in a time capsule.
    Caps looked like they were just pulled off the self.
    Copper coils had no sign of corrosion on...
    02-01-2023, 11:10 PM
  • TR103
    Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
    by TR103
    Hi, I have a Samsung UE50TU with:
    - sound and backlight, but no picture
    - when it arrived, it had a picture for a few seconds
    - it keeps rebooting
    - without ribbon cable between the two panel boards, it does not reboot but I have no picture
    - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
    - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

    - without cable between mainboard and lcd panel and with a jumpered...
    01-22-2025, 04:12 PM
  • Ierwin
    Samsung UE60KU6079 backlight okay mainboard responsive, no picture, no sound
    by Ierwin
    Hello everyone,
    Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
    The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
    He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
    I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
    Anyway I still fully expect that there has been something seriously damaged...
    05-13-2025, 03:31 PM
  • jchang
    Samsung UN70NU6900F no picture and no sound
    by jchang
    Hi all

    I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.



    Symptom:
    No picture no sound.
    When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
    No sound at all.



    What I tried:
    1. I tried unplugging the left or right ribbon...
    01-09-2023, 06:28 PM
  • Loading...
  • No more items.
Working...