How to open Beovision V1-40?

Repair_dane

Member

Join Date: May 2020

Posts: 42

Country: Danmark
#1

How to open Beovision V1-40?

07-17-2021, 10:54 AM

Hi guys,

I have a Bang & Olufsen Beovision V1-40 on the repair table at the moment. It is broken, but I can't even figure out how to open the tv without damagin the case. All screws are removed. Anyone knows this one?
Tags: None

Previous template Next

A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair

by howardc64

Problem

This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
- Channel: Troubleshooting Computer Displays
08-04-2024, 10:36 PM
Lowest possible resistance on laptop motherboard rail - Guide Table request

by Nagy Daniel

Hi, I'm Daniel, and I'm new to the world of repairing motherboards.

I would like to create a table, or more likely a guideline about the voltage rails and their possible resistance rail.

I know that the motherboard design has a very big depend on the rail's resistance, but I would like to know what is the smallest value for a rail that can be acceptable. For example, I heard that some new gaming motherboards can have 0,5 Ohm resistance on the GPU rail, but on an older type, it could be a sign of a shorted GPU rail.

So, I generated a table with AI so I can...
- Channel: General Electronics Technical Discussion
03-04-2025, 08:24 AM
MacBook Pro M4 16" A3403 on the table with water damage

by TimSinger

Hi guys,
I have a MacBook Pro M4 16" A3403 on the table with water damage. I allready found the problem within a bad cap. As far as my researh went, I couldn't find the schematics and boardview for this MacBook model. They seem not to be released now. So my question is if anybody has a working A3403 on the table and could tell me, which specification this capasator has?
I attached a photo of the missing cap. It's on the bottom side of the logicbard.

I am very thankful for your replys.
Thanks in advanced and best regards from Hamburg Germany...
- Channel: Troubleshooting Laptops, Tablets, and Mobile Devices
07-13-2025, 11:12 AM
Crest Smart Home Single Power Adaptor SHSPM1 (rebadged Tuya device) - bad cap causing failure, how to repair

by mrdevil

Hi all,

Wanted to share this as I couldn't find anything on the internet about this problem, so pulled one apart and found the problem myself. Years ago I bought approx 20 or so Crest Smart Home Single Power Adapter smart switches - small 240v Tuya-compatible (rebranded) smart switch devices with power monitoring, which Big W had on sale for half price. Paid $7.50 each for these, and they've been incredibly useful for turning things on and off remotely... and monitoring how much power each device uses.

However, after about 12 months, I had a number of these stop working...
- Channel: Troubleshooting Appliances and other Household Electronic Stuff
01-08-2025, 03:19 AM
Sony 70" 70X690E - It's now a divorce risk! (6 Months on kitchen table.) New power board installed! STILL trouble!?!?

by phuzzyday

For masochists who want to see some of the crap that I have been through already... (Truly optional now though, all those trees were barked up for no reason.)

https://www.badcaps.net/forum/troubl...klight-circuit

I started a new thread to get a fresher look at things, even with eyes that looked before. It's different now!

So I got this on Facebook for $66US, blank screen. Just reseated all...
- Channel: Troubleshooting TVs and Video Sources
09-08-2025, 05:53 PM
Loading...
No more items.

How to open Beovision V1-40?

How to open Beovision V1-40?

Related Topics