Samsung UN40F6400 No Picture Bad T-Con or Panel!!!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mugunthans
    Member
    • Dec 2016
    • 32
    • Canada
    #1

    Samsung UN40F6400 No Picture Bad T-Con or Panel!!!

    Dear all,
    I have Samsung TV, which reboots continuously and I opened the TV and checked for loose connection - disconnect and reconnect all cables.
    When I power ON and noticed that its entered into Burn mode (RED/GREEN/BLUE) screen and I turned off and checked the cables again but this time it turned into white screen only. No matter how many times I restart the TV the result is same. But Sound is OK.

    Needed your help and expert advise, whether it is the TCON faulty or Total Panel Failure??

    TV Model: UA40F6400
    T-Con Model: BN41-01939B

    Below are the Voltage measurement.

    TCON LED status: All 3 Blue LEDs are ON.
    Panel: 12.7v
    AVDD:17v
    HAVDD:8.5v
    Fuse:12.7v
    B1.8:1.7v
    B3.3:3.3v
    HVin:13v
    VonE:29.2v
    VoffE: -9.5v
    Vss: -7.5v
    Attached Files
    Tags: None
    • dick_barton
      Badcaps Legend
      • Aug 2015
      • 6643
      • Wales
      #2
      Re: Samsung UN40F6400 No Picture Bad T-Con or Panel!!!

      What voltage do you have at the Panel_12V point?
      Willing to help but I'm no expert.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • iglitare
          Sony KD-75XF9005 grey Picture but Sound. TCON or panel?
          by iglitare
          Hi,

          i want to repair a Sony KD-75XF9005 TV that initially only showed a grey picture.
          Backlight seems to work, Sound (Setup menu after reset) works.
          If i dissconnect the left FFC cable from TCON to panel i have half a screen on the right. If left cable is connected always only the grey screen.
          Interchanged the cables, its always only the right side that is working. Always grey if left side is connected.
          With my small knowledge i would think at least the cables are good.

          Can this happen because of a bad tcon board?
          Or is it always a bad/shorted...
          09-04-2025, 07:13 AM
        • Document Archive
          Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
          by Document Archive
          This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
          09-07-2024, 05:50 AM
        • x_orange90_x
          TCL 50S535 bad tcon or panel issue?
          by x_orange90_x
          Just bought this for 10 bucks yesterday hoping to fix it. The guy said water dropped inside from a dehumidifier hose and it started showing black and white vertical bars then went blank. When I got it home and turned it on it came on fine and displayed correctly but I was noticing faint vertical bars in the image. After a little bit I turned it off and back on and it was a black screen again. I opened it up to check for water damage and corrosion but didn't find anything of the sort. I cleaned the ribbons anyway and reconnected them but still got a blank screen. If I disconnect the right side...
          03-29-2025, 11:02 PM
        • maneatingmonkey
          Missing LCD Panel Voltages VGH, VGL, VCOM (TCL 55P6US Sound & Backlight but NO Picture)
          by maneatingmonkey
          I have a TCL 55P6US with sound and backlight but no picture. This model does not have a T-CON board, and the right (rear perspective) panel board is fed from the left panel board. I have not been able to induce any change by disconnecting the secondary panel board or the tape cut-off method on the primary board.

          There are a bunch of voltages missing on the panel boards. I can't find any shorted caps of the panel boards, and all of the missing voltage rails read in the kiloohms, which leads me to suspect the issue may lie on the circuit board, rather than a short in the panel.
          ...
          L Panel #1
          11 Photos
          03-27-2024, 07:17 AM
        • stylishconsultant
          un60j620dafxza - Samsung No Display Problem
          by stylishconsultant
          Hi All,

          Need help.

          I have a samsung un60j620dafxza led tv. When I plug it in it has no display, no sounds, and no standby lights.

          So I opened the tv and disconnected the power to the mainboard and the backlight powered up. This according to many people says that this is a mainboard
          problem. I checked the voltage coming from the stb and I read 1.3 volts on pins 1,3,5 and 7 which are low volts instead of 13 volts which i think the lcd panel
          might be drawing too much power from the power supply that it prevents the right voltage going to the mainboard....
          09-04-2024, 03:26 AM
        • Loading...
        • No more items.
        Working...