LG 47L5700, add RF emitter for magic remote

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • alfatv
    Badcaps Veteran
    • Sep 2020
    • 353
    • Canada
    #1

    LG 47L5700, add RF emitter for magic remote

    This is 2011 LG model.
    There is an option to add AN-MR200 magic remote, but it requires another dongle connected to TV.
    I got a hold of plasma TV from the same year which works with magic remote and comes with so called RF emitter inside TV. I confirmed that it's essential for magic remote operation by unplugging it.
    So, the idea is to install this RF emitter into 47LW5700, has anybody tried it?
    There is unsoldered connector on main board possibly for it.

    Here is ebay listing for this module:
    https://www.ebay.com/itm/New-LG-60PZ...e/164595022863

    Update:
    It's P1302 connector
    Looks like included in 5600 main board
    Service manual also mentions it.
    Last edited by alfatv; 01-05-2021, 01:05 PM.
    Tags: None
    • alfatv
      Badcaps Veteran
      • Sep 2020
      • 353
      • Canada
      #2
      Re: LG 47L5700, add RF emitter for magic remote

      Typo in model number, should be 47LW5700

        Comment

        • neilc6
          Badcaps Legend
          • Nov 2015
          • 1550
          • Canada
          #3
          Re: LG 47L5700, add RF emitter for magic remote

          The magic remotes work on bluetooth and need a bluetooth module installed and the firmware needs to support it.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Document Archive
              AMD Radeon RX 5600 XT (5600XT) Schematic & Board View
              by Document Archive
              AMD Radeon RX 5600 XT (5600XT) Schematic & Board View

              The Radeon RX 5600 XT is a performance-segment graphics card by AMD, launched on January 21st, 2020. Built on the 7 nm process, and based on the Navi 10 graphics processor, in its Navi 10 XLE variant, the card supports DirectX 12. This ensures that all modern games will run on Radeon RX 5600 XT. The Navi 10 graphics processor is an average sized chip with a die area of 251 mm² and 10,300 million transistors. Unlike the fully unlocked Radeon RX 5700 XT, which uses the same GPU but has all 2560 shaders enabled, AMD has disabled...
              10-01-2024, 10:42 AM
            • cstout
              DeLonghi AC Remote only accepts 3V
              by cstout
              Hello all, I've been looking into this portable air conditioner's remote control and can't find what could be causing the problem - or possibly this remote is just terribly designed.

              The remote only works at exactly 3V - if I drop it any lower, using my bench power supply, to say, 2.9V then the remote will not flash the display and turn off. I don't have any AAA batteries that are exactly 1.5V each so I'm not sure if this remote is designed this way - to only use the freshest possible batteries, or if there's a failed component in the mix.

              I can't find any schematics...
              06-03-2024, 03:53 PM
            • Mc_Millian
              Toshiba 50lf711u20 fire tv remote not pairing
              by Mc_Millian
              Hello everyone,

              I was wondering if anyone could help my in pairing a remote with a Toshiba fire tv?
              The Tv model number is: 50lf711u20 Rev B.


              I've already replaced all the the circuit boards within the tv along with the I.R. sensor receiver.

              I've tried 3 different remotes which should be fully compatible with this TV.


              Oddly enough. A few if the buttons on all of the remotes actually work. Even without pairing...which makes no sense.

              The power button, along with the volume,back,select, and directional...
              04-07-2022, 12:15 PM
            • edugimeno
              HiSense 55A7500F won't obbey to remote after power on
              by edugimeno
              Hi! I have this TV set that does the following:
              1) I press the red power button on the remote
              2) The TV turns on normally
              3) After that it won't take any other command from the remote, neither power off, volume, channel, NOTHING
              4) We need to either pull the main cable or use the built in button at the bottom to select funcion OFF

              Then after it's off, it would again accept the TURN ON from the remote and same again

              BUT:
              -The remote does show the correct IR beam while observed thru a phone camera
              -The TV works fine while using the MiRemote...
              03-14-2023, 11:22 AM
            • tmhobadcap
              Pioneer VSX-522-K remote control not working???
              by tmhobadcap
              I have this receiver for at least 10 years. Usually, we just use the remote for turning on/off and adjusting the volume. Recently, the remote control started not able to turn the receiver on. Later, the volume also could not be adjusted by the remote control.

              At first, I thought that it was the usual problem which can be fixed by cleaning the contacts on the switches and the pcb. I opened the remote and clean it with alcohol. The remote did work again after that. But after one day, it did not work again. I opened it again and clean with alcohol and contact cleaner. Again it worked...
              12-24-2020, 01:44 AM
            • Loading...
            • No more items.
            Working...