Re: Need help with resistor value please
My post #54:
You can do the force on test without the resistor, I suggest to use resistor in case you make wrong connection that can cause damage to the circuit, so if you perform the connection correctly for sure then you can do without using resistor, so inspect real well on how you have the PS-ON and 5V/3.3 pins connected together, I would solder one wire to each pin then you can connect the end of the wires together after powering up then wait about 5 seconds before connecting the two ends of the wire together to simulate power on condition.
Did you follow that instruction to wait 5 seconds before connecting the PS-ON to 5V/3.3V pin?
Originally posted by JunkmanJimbo
View Post
You can do the force on test without the resistor, I suggest to use resistor in case you make wrong connection that can cause damage to the circuit, so if you perform the connection correctly for sure then you can do without using resistor, so inspect real well on how you have the PS-ON and 5V/3.3 pins connected together, I would solder one wire to each pin then you can connect the end of the wires together after powering up then wait about 5 seconds before connecting the two ends of the wire together to simulate power on condition.
Did you follow that instruction to wait 5 seconds before connecting the PS-ON to 5V/3.3V pin?
Comment