Quality of different TV brands

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Askic
    Senior Member
    • Sep 2018
    • 187
    • BIH

    #1

    Quality of different TV brands

    Hello guys,

    there is a sticky thread with very impressive and long list of TV brands that use the same Vestel products. Is it fair to say that Panasonic, Philiphs, Telefunken and Vox are practically the same quality since same equipment is built into them?
    I don't think that for example Vestel 17IPS20 is different for 40" Panasonic vs 40" Sharp or Blaupunkt.

    Does this mean that the most important components (MB and PSU) are the same no matter what is written on the chasis? I know that there are very few manufacturers of displays in the world.

    I also have a TV with problem with 17IPS20 from Vestel. So, if I want something higher quality, I need to buy SONY or LG product?

    Best regards,

    Askic
  • hosbulduk
    Member
    • May 2020
    • 17
    • Germany

    #2
    Re: Quality of different TV brands

    The subject is old, but in all Vestel televisions; For example, hotel series produced for the Philips or Panasonic brands are the same as mb and psu. I shared the review article on mb120 motherboards from 3 different brands on the Turkish forum. There are only software and license based differences in the menu display and the content of the Philips Smart menu is different.
    By uploading the software and profile files of various brands to the motherboards, you can have a Philips TV with the menu contents while the case is part of the Telefunken. .

    The difference between them is only due to the panel used. If anyone wants to try this process, there is a remote incompatibility, most likely a mirror screen.
    Only the panel used determines the qualitative difference between the televisions.

    In fact, this method is a tool that will help you solve your problem on motherboards with software problems where you cannot find the original software. But there are a few things to keep in mind.

    https://tavsiyeforumu.com/konu/mb120...-islemi.10562/

    Comment

    Related Topics

    Collapse

    • psdavid65
      Toshiba 40L1333DEV Vestel 17IPS20
      by psdavid65
      Quick Question Please.
      Is low resistance on gate pin 5 of U202 normal? I have a very very low resistance of 5 ohm on this gate. In diode mode, it looks shorted and beeps. Is this a normal behavior of this FAN6300 IC?
      All other components on this vestel board have valid readings except for this U202 IC.
      09-21-2023, 12:29 PM
    • France_53
      Vestel tv, how to flip the image?
      by France_53
      Hello everyone from Italy, I'm here to ask for help on a Vestel TV, I've had a Vestel TV branded "XD" with a broken screen for years, but now I've found a Telefunken (still Vestel but older) and I've mounted the panel on the "XD" TV, it works, but the screen is upside down, given that Vestel does not allow you to rotate the image from the service menu, does anyone know how to solve the problem? the original panel is marked ves315WNDS-2D-N12 while the main board 17mb110, the panel I mounted instead in the tv (from the telefunken) is a ves315WNDA-02. ... It is not worth repairing...
      05-12-2024, 05:22 AM
    • DXseekerMO
      Backlight strip quality, Amazon vs Ebay vs ShopJimmy. Is there really a difference?
      by DXseekerMO
      Hello everyone!

      Recently I've noticed that some ShopJimmy backlight strips don't have double-sided tape installed upon them when an application calls for it, and I must purchase the tape separately. In a recent chat conversation with a customer service agent I told them if this tape wasn't applied when it was called for I would begin to consider ordering my backlight strips elsewhere. It looks like this time may have come.

      I recently got a TCL 65S4 with bad backlights. After looking at the SJ listing here: https://www.shopjimmy.com/tcl-jl-d65...365as-m-led-ba...
      Yes
      0%
      1
      All backlight strips are the same quality
      0%
      1
      No
      0%
      0
      12-16-2021, 03:58 PM
    • ray14324
      Telefunken LED TV with no standby linght equipped with Vestel 17IPS20 PSU
      by ray14324
      Hi everyone,

      Searching the forum revealed loads of issues with this type of power supply board however I could not find a solution to my issue from them. Excuse the "another Vestel" thread

      The full story was: my Telefunken TV did not have a standby red light after of series of power outages in a couple of minutes. Sadly in my rural city the only technician that fixes TV's is away these days as I cannot reach him by phone. I want to try to have a go at it (with the internet's help).

      Reading into this symptom the general consensus was that...
      08-31-2021, 07:55 AM
    • worlor
      Bad Vestel 17IPS20 : shortage, need help
      by worlor
      Hello,
      My Vestel television has stopped working.
      After first diagnosys, the power board 17IPS20 R6 don't work (no 12V on output).
      I have replaced :
      • U300 FAN6300 -> completely blown up
      • Q301 MOSFET FQPF8N60C
      • C387 1uF Capacitor -> shorted
      • C295 & C296 1uF capacitor -> to be sure


      But with my multimeter, there is conductivity between VCC and GND on U300 and U202. I don't know why. Maybe a diode but i can't test these because of the short.
      Can you help me to find the cause of the shortage ? have you any ideas ?

      I attach...
      11-08-2020, 06:47 AM
    • Loading...
    • No more items.
    Working...