Good day guys
I got this Vizio D65u-D2. I've read all the other threads about this specific model, but all got to do with Backlights.When plugged in, there is no Standby Light, also set doesn't switch on or no sound coming from set when switched on(regulators etc)
With AC connected - not switched on - and Connectors to Mainboard and LED Driver board I found the following readings on connector CN101
1. 5.103V
2. 5.103V
3. 0.043V(fluctuating)
4-16. No readings, although some may differ from 0.0 to 0.25/0.35
With AC Connected - connectors to Mainboard and LED Driver board connected - power button pressed, the following readings on CN101
1. Fluctuates. Range 0.809V to 5.070V
2. Same as 1
3. Fluctuates from 2.4 to 3.09V. Even less than 2V at stages
4-16 No Readings
I am a complete novice, and would appreciate any help. Thank you for reading this.
I got this Vizio D65u-D2. I've read all the other threads about this specific model, but all got to do with Backlights.When plugged in, there is no Standby Light, also set doesn't switch on or no sound coming from set when switched on(regulators etc)
With AC connected - not switched on - and Connectors to Mainboard and LED Driver board I found the following readings on connector CN101
1. 5.103V
2. 5.103V
3. 0.043V(fluctuating)
4-16. No readings, although some may differ from 0.0 to 0.25/0.35
With AC Connected - connectors to Mainboard and LED Driver board connected - power button pressed, the following readings on CN101
1. Fluctuates. Range 0.809V to 5.070V
2. Same as 1
3. Fluctuates from 2.4 to 3.09V. Even less than 2V at stages
4-16 No Readings
I am a complete novice, and would appreciate any help. Thank you for reading this.
Comment