Philips 65PUS6412 / 12 flash file

Neon_84

New Member

Join Date: Jan 2020

Posts: 2

Country: Hrvatska
#1

Philips 65PUS6412 / 12 flash file

01-04-2020, 07:06 PM

Hi,

I have Pihilps stuck on logo, boot repeat.
Does anyone have flash file to share, I've been killing myself to find it...

Thnx 🥂😐

Mark: Philips
Model: 65PUS6412 / 12
Chasis: TPM 17.1ELA
Main board: 715G8579-M01-B00-005Y
EMMC : klmag1jenb-b041
Tags: None
oabdelmajid34

New Member

Join Date: Sep 2022

Posts: 5

Country: morocco
#2

05-11-2024, 11:29 AM

need emmc firmware
Comment

Previous template Next

Unable to verify IC or write/erase/flash BIOS file to XMC QH128AHIG SPI chip using NeoProgrammer/AsProgrammer

by testaccgta

Hi, everyone!

I've recently acquired two brand new SPI chips to replace the one currently in my Acer A514-54G laptop MB (FH5AT LA-K092P). The reason why I'm replacing the current SPI chip is because I had some difficulties with a third-party IT assistant who pretty much lacked the soldering skills and ended up destroying the current SPI chip soldered to my MB from factory.

I've decided to do this on my own because I spent the past month or so learning some soldering skills and BIOS modding through Badcaps and WinRaid forums, hence the attempt. I've also chosen to buy...
- Channel: BIOS Requests ONLY!
09-01-2024, 08:24 PM
File NVM for Philips 55oled707/12

by dawid11931

Hello, I am looking for an nvm batch file for Philips 55oled707/12
- Channel: Troubleshooting TVs and Video Sources
02-19-2025, 09:17 AM
[Help] Lenovo Yoga Slim 7-14ARE05 (DA0LS3MBAF0) – 25Q80DVN1G Flash Is All FF, USB-C PD Stuck at 5V

by ekozeko333

Hi all,
I’m trying to recover a Lenovo Yoga Slim 7-14ARE05 with board DA0LS3MBAF0 Rev:F. I’ve run into an unusual issue where USB-C PD is stuck at 4.7–5V and the system won’t boot (keyboard lights flash briefly, then nothing).
🔥 The Problem Started After Suspected ESD/PD Fault
I experienced a power issue or ESD event through a USB-C charger
After that, the NX20P5090 power switch was visibly burned and was replaced
Now the PD controller always negotiates 5V @ 2A, even with known-good chargers
🧠 What I’ve Done So Far
Flashed...
- Channel: BIOS Requests ONLY!
06-21-2025, 02:48 AM
Request the flash file of this board at number zcd8933-c200s-mp5

by amingpx

I need flash file for this video car at this number. Zcd8933-c200s-mp5 v2.0...
- Channel: Troubleshooting TVs and Video Sources
12-04-2024, 09:13 AM
Nikon D800 camera - flash don’t work and capacitor don’t charge

by corrize

Hello, I'm stuck in troubleshooting…
The flash system works like that : when the (mechanic) flash button is pressed, the flash mecanically pop up, and a circuit buck boost elevate 7v (batt) to 200-300v (?) for charging the big capacitor. And when the photo shoot button is pressed, the capacitor is discharged in the xeon light.

In the D800, there is a first « power board » close to the battery. 2 wires (batt 7v) goes to another little « flash board ». I measured 7v, so ok.
When I press the flash button, it's detected by the system, flash icon appear on LDC display....
- Channel: Troubleshooting Printers, Copiers, Scanners and other Imaging & Printing Devices
10-01-2022, 10:02 AM
Loading...
No more items.

Philips 65PUS6412 / 12 flash file

Philips 65PUS6412 / 12 flash file

Comment

Related Topics