LCD Panel - Scratch Advice/Tips

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Bloopeta
    Badcaps Veteran
    • Jun 2018
    • 526
    • United Kingdom
    #1

    LCD Panel - Scratch Advice/Tips

    I have a 42" LG here, with an LCD panel that has suffered a scratch somehow, and as a result, has caused an annoying white dot on the screen.

    Any tips or advice on how to make this less visable please?

    Ive attched some pictures, any suggestions greatly appreciated.
    Attached Files
    Tags: None
    • diif
      Badcaps Legend
      • Feb 2014
      • 6978
      • England
      #2
      Re: LCD Panel - Scratch Advice/Tips

      Not something I've tried but maybe a tiny drop of LOCA (liquid optically clear Adhesive) would help?
      The stuff for phone screens might be too thick but there are runny versions available. There is some sold on Ali in black bottles for about a pound that is nice and runny.

        Comment

        • jjanssen7
          Badcaps Veteran
          • Nov 2012
          • 252
          • Canada
          #3
          Re: LCD Panel - Scratch Advice/Tips

          I've used a sharpie/permanent marker.

            Comment

            • Bloopeta
              Badcaps Veteran
              • Jun 2018
              • 526
              • United Kingdom
              #4
              Re: LCD Panel - Scratch Advice/Tips

              Originally posted by diif
              Not something I've tried but maybe a tiny drop of LOCA (liquid optically clear Adhesive) would help?
              The stuff for phone screens might be too thick but there are runny versions available. There is some sold on Ali in black bottles for about a pound that is nice and runny.
              Ill get some ordered, for the time being I ran the other halfs eye liner pencil over the chip lol, Id rather have a dull black dot that a bright white one haha

              Thanks for your help

                Comment

                • Bloopeta
                  Badcaps Veteran
                  • Jun 2018
                  • 526
                  • United Kingdom
                  #5
                  Re: LCD Panel - Scratch Advice/Tips

                  Originally posted by jjanssen7
                  I've used a sharpie/permanent marker.
                  That was my logic with the eyeliner haha

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • howardc64
                      LG 49UJ6500 LCD panel lighter band that goes away
                      by howardc64
                      49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

                      Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
                      02-19-2023, 12:13 AM
                    • triplefour
                      SAMSUNG UN50TU8000F rebooting, backlight ok. No 12v to panel boards.
                      by triplefour
                      TV flashes backlight then reboots over and over. no image. Client said it used to have image for a bit before rebooting. Got worse over time.

                      tcon is built into mainboard.
                      Only one cable goes to panel boards.
                      there is a cable from one panel board to the other that links them.
                      cost cutting measure that results in us having harder time to diagnose.
                      removing the link to the second panel board allows TV to stay on with stable backlight but no image.
                      used cut off tape method to mask 1 maybe 2 pins on the side of the cable that goes to that second panel board....
                      07-28-2022, 07:59 PM
                    • Storyteller12
                      QN55Q60R Service Menu Panel Help
                      by Storyteller12
                      I had a the above tv qn55q60r that had a bad panel but everything else good. I had another panel here from un55nu6900 with bad leds and melted diffusers.

                      I put the nu6900 panel in and powered it up and it does work but there are lines vertical lines.

                      I was trying to change the panel type in the service menu but don’t see my exact panel. Anyway to fix this or someone have similar experience.

                      the clear picture is the panel type from the service menus on the nu6900. The other 1 is the panel type that was set for the q60r with the bad panel....
                      01-13-2024, 01:57 PM
                    • maneatingmonkey
                      Missing LCD Panel Voltages VGH, VGL, VCOM (TCL 55P6US Sound & Backlight but NO Picture)
                      by maneatingmonkey
                      I have a TCL 55P6US with sound and backlight but no picture. This model does not have a T-CON board, and the right (rear perspective) panel board is fed from the left panel board. I have not been able to induce any change by disconnecting the secondary panel board or the tape cut-off method on the primary board.

                      There are a bunch of voltages missing on the panel boards. I can't find any shorted caps of the panel boards, and all of the missing voltage rails read in the kiloohms, which leads me to suspect the issue may lie on the circuit board, rather than a short in the panel.
                      ...
                      L Panel #1
                      11 Photos
                      03-27-2024, 07:17 AM
                    • Document Archive
                      HP 14-am047tx + 1 YR Full Standard Extended Warranty + McAfee Scratch Card 1PC User (1 YR) Notebook Specification for Upgrade or Repair
                      by Document Archive
                      This specification for the HP 14-am047tx + 1 YR Full Standard Extended Warranty + McAfee Scratch Card 1PC User (1 YR) Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 14-am047tx + 1 YR Full Standard Extended Warranty + McAfee Scratch Card 1PC User (1 YR) boardview and 14-am047tx + 1 YR Full Standard Extended Warranty + McAfee Scratch Card 1PC User (1 YR) schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon...
                      09-06-2024, 08:30 AM
                    • Loading...
                    • No more items.
                    Working...