Panel cross reference

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • satvu
    New Member
    • Jul 2019
    • 2
    • Canada
    #1

    Panel cross reference

    Hi all and thanks for the welcome. First posting so will make it short. Just getting into "real" flatscreen repairs. Have a Sylvania UHD set with bad main board.. Same main boards found in a myrid other sets, have searched and found no conclusive answer and so I seek great knowledge. The set has a Samsung LSC550FJ14 panel in it. The t-conn calls for part# LMC550FJ14-W, however the main board calls for part# LSC550FN18. Is there anywhere or anyone who can shed light on panel cross references? Been told locally that wrong panel part # may have been the main boards demise.
    Last edited by satvu; 07-12-2019, 09:00 AM. Reason: misspelling corrections
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • advant
      Driving a Sharp TCON/panel with a universal main board
      by advant
      This thread is about trying to get an Universal Main Board to work with a Sharp TCON and panel.

      I have a Sharp LC-46D85UN TV that has had a main board issue. Since this model is from 2009, I am not able to find an exact replacement of the main board. Instead, I decided to see if I can future proof this tv by getting a Universal Main Board (T53U21.2) from China to work with the Sharp TCON (CPWBX4291TPZA) and panel. The universal main board supports a 8 bit dual channel LVDS interface whereas the TCON requires a 10 bit dual channel LVDS input. I have modded the LVDS connector to match...
      02-03-2020, 12:25 AM
    • howardc64
      LG 43UK6500AUA no LCD image, backlight and sound okay
      by howardc64
      Similar to another LG UK series here

      https://www.badcaps.net/forum/showthread.php?t=93943

      Have backlight and sound. no LCD image.
      • main board has integrated T-Con
      • main board T-Con has LCD DCDC/PMIC RT6950GQW QFN68 package. Richtek chip. Can't find datasheet. Chip generates VADD (10.44V), VGH (~28V), VGL (~-14.5V)
      • RT6950 pin 18-19 (clockwise) appeared to be bridged. Unlikely from my probing, looks like ball squeezage so it probably got hot
      • Cleaned up bridging. Pin 17 is VGL (-14V) Pin 20 is VGH (28V). Pin 18 (I think 19 too) jumps between VGL and VGH voltage
      ...
      03-12-2023, 01:04 PM
    • howardc64
      LG 49UJ6500 LCD panel lighter band that goes away
      by howardc64
      49UJ6500 LCD panel has a lighter band on top when first powered on. Goes away (or gets much fainter) after TV on for a few min. After powered off for awhile and power back on, same band appears. If powered on immediately after powering off, no or much fainter band. Running the latest firmware.

      Disassembled the TV and lifted the LCD panel during testing. Band is on the LCD panel (can see the band on the panel as I lift it slightly) Backlight is perfectly even at the top edge. Double checked LCD panel alignment in the frame and is perfect but since band moved with the panel, its on...
      02-19-2023, 12:13 AM
    • Dani_2024
      Sceptre U550CV-UMR 4K LED, Bad Caps on Main Power Board?
      by Dani_2024
      Hi and thanks in advance for any input you might provide!
      I have a Sceptre U550CV-UMRD8POTV83BB 4K LED (this is a dumb tv) that I bought new in August 2021, so It's just completed 3 years.
      Main power board model: TP.MS3683.PC821 T-Con board: N4TP546UHDPU2L_BO

      Last Sunday I was watching a dvd and fell asleep for about half hour, when I awoke the tv screen was black and couldn't get the dvd menu to show, so I changed the input to antenna and had sound but no picture, turned it off. I then got online and found this great site! ....read many troubleshooting tips and this...
      5 Photos
      10-28-2024, 05:06 PM
    • Storyteller12
      QN55Q60R Service Menu Panel Help
      by Storyteller12
      I had a the above tv qn55q60r that had a bad panel but everything else good. I had another panel here from un55nu6900 with bad leds and melted diffusers.

      I put the nu6900 panel in and powered it up and it does work but there are lines vertical lines.

      I was trying to change the panel type in the service menu but don’t see my exact panel. Anyway to fix this or someone have similar experience.

      the clear picture is the panel type from the service menus on the nu6900. The other 1 is the panel type that was set for the q60r with the bad panel....
      01-13-2024, 01:57 PM
    • Loading...
    • No more items.
    Working...