there are certainly a lot of "failures" stati on this page. :-( hopefully someone with more experience will know what they may be highlighting but my feeling is that it can't good especially some of the eprom stuff.
you may be looking in the wrong place... I see this set has a "one connect box".... :-(
Obviously you cant access the TV unless you have the one connect plugged into the main board but you have a black screen asking to plug in the connect box
that's the point of the "test"... that screen is entirely produced without any input from the one connect. Not sure of any other things to try but I am leaning towards the one connect and / or interface as having an issue.
Comment