about 42pj350

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • hispeck
    Badcaps Veteran
    • Aug 2015
    • 258
    • nigeria

    #1

    about 42pj350

    Hello friends, i have issue with this plasma, i mixed up the mosfet on ysus EBR66607501, when i removed them from the board i did not take note of their positions, like where 30f124 and 30j124, even after changing new once they still blow, please i need help on there position on board.
    hispeck

Related Topics

Collapse

  • zwarder
    LG 42PJ350 panel death ?
    by zwarder
    Hi initially suspected Va & Vs being low but they do come back up to very near spec.
    The screen looks pixelated & blotchy any ideas?...
    08-17-2023, 03:47 AM
  • Farasa
    LG 42Pj350 ysus maldischarge
    by Farasa
    Need assistance please

    I recently got in Lg 42pj350 with the usual y-sus problem,found four Igbts shorted 30f124 & 30J124 repalaced those refreshed the board then I examined the Z-sus board,to find the coil had dry joints..re-soldered most of that board...it came on nice,tested it for couple of hours

    I released it to the client,it came back five days later,I found all the Igbts I replaced before shorted with the addition of two fets...I replaced all these checked the board again,replaced it...now I have mal discharge ...what else can I do thanks in advance
    05-19-2019, 10:02 AM
  • Igor_van_Dame
    LG 42PJ350 Clicking Troubleshooting
    by Igor_van_Dame
    Bolstered by the guidance provided in this thread - https://www.badcaps.net/forum/showth...61#post1003961, I ordered a replacement Power Supply Board and read through the 'training' manual linked in the thread in preparation to install the new board (and solve the faulty startup process). I have two questions:

    1) My 42PJ350 was produced in Mexico and the ID plate *does not* have the Vs/Va voltages stated below the mains voltage. The line below the 'Power' is 'Manufactured' with no space/line between to provide the configuration voltages. Is there a known fixed voltage...
    11-26-2020, 04:22 AM
  • goldbird78
    ebr66607501 Q12 Q13 & Q21 Q22
    by goldbird78
    Hi all, I'm attempting to repair a ebr66607501 Ysus board and have removed the Q12 Q13 sus up and the Q21 Q22 sus down igbts which were shorted and now I cant remember where the 30F124 and the 30J124 go !!! Any help would be appreciated. Thanks
    11-20-2018, 08:47 PM
  • nenea dani
    LG 42PJ350 warm IGBT
    by nenea dani
    Dear colleagues, I want to fix the LG 42PJ350 that burned the C766 330pf / 1Kv capacitor, and the IGBT Q11 (30J124) and Q21 (30F124) all came in from Y SUS . I have changed the three components from two different sources and the situation is the same. At startup, the image is very bright, with lots of red and noise as if it were a weak signal TV. In 20 seconds, the image gradually returns to its correctness, but the radiator on which the Q11 (30F124) lies is extremely warm . It looks like it's all in the area of this transistor and this in max 30-40 seconds. I do not find anything abnormal in...
    12-12-2017, 04:16 PM
  • Loading...
  • No more items.
Working...