I have 11.8- 11.9 v at pin 1&2 and 11.9 at the IC switch, I have tried disconnecting the TCON from the LCD, and nothing changes, The backlight will not come on.
Is there a way to force the backlight on? The TV was struck with a remote, but I can't see any damage. I have another power board with a standby power problem, I saw a thread on it's repair,I may use this one to try to fix it. I am not sure which is the better way to go.If I can get the back lit, I could see if the LCD is damaged.I tries a bright light at many angles and I can't see any cracks.
I followed almost all of the suggestions from this thread.
https://www.badcaps.net/forum/showthread.php?t=45671
Is there a way to force the backlight on? The TV was struck with a remote, but I can't see any damage. I have another power board with a standby power problem, I saw a thread on it's repair,I may use this one to try to fix it. I am not sure which is the better way to go.If I can get the back lit, I could see if the LCD is damaged.I tries a bright light at many angles and I can't see any cracks.
I followed almost all of the suggestions from this thread.
https://www.badcaps.net/forum/showthread.php?t=45671