Tx-p42x50b

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jonny78
    Senior Member
    • Apr 2017
    • 72
    • United Kingdom
    #1

    Tx-p42x50b

    Picked up this nice Panasonic plasma! I've attached a link to YouTube to show the problem I'm faced with! I've never repaired or attempted to repair a plasma so I'm hoping someone on here can identify the problem and hopefully it's an easy enough fix!

    https://youtu.be/kj4oQ3Y9ga4

    Many thanks!
    Tags: None
    • jonny78
      Senior Member
      • Apr 2017
      • 72
      • United Kingdom
      #2
      Re: Tx-p42x50b

      anyone? seems to be quite a weird problem ive searched high and low but cannot find anyone with a similar problem!

        Comment

        • jonny78
          Senior Member
          • Apr 2017
          • 72
          • United Kingdom
          #3
          Re: Tx-p42x50b

          https://www.youtube.com/watch?v=kj4o...ature=youtu.be

            Comment

            • Hexeon
              New Member
              • Dec 2017
              • 2
              • United States
              #4
              Re: Tx-p42x50b

              Does it show those lines on all inputs? What about the menu? I am thinking this may be a problem with the main board, but it could be something else too.

                Comment

                • maxvalutech
                  Badcaps Veteran
                  • Dec 2014
                  • 804
                  • australia
                  #5
                  Re: Tx-p42x50b

                  Evenly spaced and vertical incomplete lines across whole screen. Control board ? But a lot more info required starting with voltages and particularly Vs and Va compared to what is required as shown on panel sticker.

                    Comment

                    • jonny78
                      Senior Member
                      • Apr 2017
                      • 72
                      • United Kingdom
                      #6
                      Re: Tx-p42x50b

                      Cheers guys! Took a punt on a new mainboard (got it for dirt cheap on ebay) and now it's back up and been running perfectly for 3 days! Forgot how good plasma screens are might keep this myself lol

                      Thanks again!

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • shamaltech
                          Asus Laptop Restart when loading YouTube !
                          by shamaltech
                          I have an Asus X510UN laptop.
                          It has a weird problem that it restart everytime while I'm loading the YouTube.
                          This happens only when the laptop plugged into charger.
                          When using battery power,it works fine and YouTube works without restarting.
                          Tried with Installing new Windows,changing SSD and also Flashing the BIOS.

                          Any help?
                          03-05-2025, 02:30 PM
                        • ArMaaN376
                          Samsung PS51E550 Plasma TV
                          by ArMaaN376
                          Hello,
                          I am having Samsung PS51E550 Plasma TV. While the TV was working, a crackling sound heard & video went off with audio still ON. After switching it off & ON, the red LED on TV blinks six times & then off.
                          Opened TV cover & observed foll
                          a) Green LED on the small PCB blinks at @5-6sec ON & off for 3-4 secs. Red LED on logic board ON
                          b)Vs & Va on power supply board raises momentarily to 209v & 58v resp & then drops.
                          c) Cold test on Y-main board shows all 3 pins of FGPF4536 IGBT short to Grnd.
                          How to confirm Y -Buffer board...
                          06-19-2024, 04:05 AM
                        • jm1234
                          Panasonic plasma TX-P42ST50 - 6 blinks
                          by jm1234
                          Hi,
                          anyone able to provide the service manual for old plasma Panasonic TX-P42ST50E?
                          It turns off almost immediately (0~5 seconds after pressing the on/off button) and starts flashing the red diode 6 times.
                          I disconnected the left-hand side board (SC?, both the ribbon cable and the power cable to it) and also another ribbon going to bottom left board. Then the led signal is 8 flashes. According to service guide to another Panasonic plasma it would mean the left-hand side board is faulty. But I'm not sure it 100% applies to my model.
                          I checked that board for any obvious faults...
                          05-22-2024, 06:59 AM
                        • KYBOSH
                          Hitachi 55HDS69 55" Plasma TV - No Picture But Sound
                          by KYBOSH
                          Picked up a bahemoth plasma TV not too long ago and just now getting around to looking at it.
                          No picture but you hear the TV static (white noise) playing loud and clear.
                          The back was already taken off (and no screws were provided) as the previous owner had already taken a look.
                          But it seems they didn't get too far and just left it.

                          When I first took a look I was amazed at how pristine the inside looked.
                          Its as if the TV had been in a time capsule.
                          Caps looked like they were just pulled off the self.
                          Copper coils had no sign of corrosion on...
                          02-01-2023, 11:10 PM
                        • FlailingEngineer
                          Help with Bush Tv (Vestel 17mb95m Mainboard)
                          by FlailingEngineer
                          Hi, I was recently given a Bush Smart TV by a friend and the main board seems to be hanging on by a thread.

                          Before we get to that, my first obstacle was figuring out the model number since the back sticker has gone for a walk. Upon taking off the back case, I noticed the following Vestel parts, 17MB95m mainboard, 17IPS71 (what I'd assume is power supply) and a VES420UNVL-3D-S02 display panel. After doing some research I think the TV I have is a Bush ELED42240FHDCNTD3D, based on the matching image here (https://www.manualslib.com/manual/11...td3d.html#manu...
                          05-31-2023, 06:52 AM
                        • Loading...
                        • No more items.
                        Working...