Hi all,
this power supply starts with a red led, after hitting the on button it gives 4 green blinks, the last one lasts a little longer, and then swithes off. Back to red.
I replaced all the capacitors (exept the buffer elco's).
I resoldered all the power semiconductors and the transformers.
the board is a EAX32268501/9 rev 1.1
I know a EAX32268501/14 REV. 1.4 works also fine. I know that the tv will work with a good board, because I have 2 tv's of this type.
The replacement board is called EAY34795001.
Notes: I can see a red led turning green on the main board (from red) when I switch the tv on.
I see a blue led switching on on the TCON, after a few seconds it switches off.
this power supply starts with a red led, after hitting the on button it gives 4 green blinks, the last one lasts a little longer, and then swithes off. Back to red.
I replaced all the capacitors (exept the buffer elco's).
I resoldered all the power semiconductors and the transformers.
the board is a EAX32268501/9 rev 1.1
I know a EAX32268501/14 REV. 1.4 works also fine. I know that the tv will work with a good board, because I have 2 tv's of this type.
The replacement board is called EAY34795001.
Notes: I can see a red led turning green on the main board (from red) when I switch the tv on.
I see a blue led switching on on the TCON, after a few seconds it switches off.
Comment