Announcement

Collapse
No announcement yet.

Samsung PN50B650 plasma dark picture (better than what I started with)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: Samsung PN50B650 plasma dark picture (better than what I started with)

    Originally posted by tom66 View Post
    Boards could have the same failure, though - especially if they are used. It's hard to tell w/out a scope, unfortunately
    Man... so do you think a recap on the PS board would be a fool's errand?

    Comment


      #22
      Re: Samsung PN50B650 plasma dark picture (better than what I started with)

      Unlikely to resolve this particular issue but may be worth looking at a few caps on the Y-main.
      Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
      For service manual, schematic, boardview (board view), datasheet, cad - use our search.

      Comment


        #23
        Re: Samsung PN50B650 plasma dark picture (better than what I started with)

        Originally posted by tom66 View Post
        Unlikely to resolve this particular issue but may be worth looking at a few caps on the Y-main.
        Was gonna put in a Mouser order anyhow, point out the Y board caps you think might be the issue? Not gonna be mad if it doesn't fix the issue, appreciate all the help, just grasping at straws because I don't want to just chuck out a good 50" 1080p plasma panel.

        http://assets.shopjimmy.com/media/ca...744a-top_3.jpg

        Power input is top left.
        Last edited by teryaki; 12-30-2017, 03:15 PM.

        Comment


          #24
          Re: Samsung PN50B650 plasma dark picture (better than what I started with)

          Unfortunately ShopJimmy restricts UK IP addresses from accessing their site (due to some long-standing fraud problem). Could you upload the image here, or to an image-sharing site like Imgur?
          Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
          For service manual, schematic, boardview (board view), datasheet, cad - use our search.

          Comment


            #25
            Re: Samsung PN50B650 plasma dark picture (better than what I started with)

            Originally posted by tom66 View Post
            Unfortunately ShopJimmy restricts UK IP addresses from accessing their site (due to some long-standing fraud problem). Could you upload the image here, or to an image-sharing site like Imgur?
            https://imgur.com/4AP2Jdr

            Thanks again.

            Comment


              #26
              Re: Samsung PN50B650 plasma dark picture (better than what I started with)

              I would suggest replacing the highlighted capacitors...
              However I cannot be sure if this is the fault on this particular set.
              Attached Files
              Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
              For service manual, schematic, boardview (board view), datasheet, cad - use our search.

              Comment


                #27
                Re: Samsung PN50B650 plasma dark picture (better than what I started with)

                Originally posted by tom66 View Post
                I would suggest replacing the highlighted capacitors...
                However I cannot be sure if this is the fault on this particular set.
                You're a prince among men, at least this is something I can try.

                Comment

                Working...
                X