Toshiba 55SV670U No standby light with 5 standby volts

[budm]

Re: Toshiba 55SV670U No standby light with 5 standby volts

Pardon me. 12 on SR81, 5 for SR80

OK since that relay runs on 12V that means the 12V power supply has to be working, that 12V/18 power supply 9as explain earlier) is on when relay SR 80 is turned on, so do you have the 12V and 18V at the connectors?

[jhbox]

Re: Toshiba 55SV670U No standby light with 5 standby volts

Which connectors are you talking about? Also, 80 has 5v across the coil, and is closing, and SR81 is 12v and is not closing. I think you have it backwards.

[jhbox]

Re: Toshiba 55SV670U No standby light with 5 standby volts

Also, found a manual for this actual model

[budm]

Re: Toshiba 55SV670U No standby light with 5 standby volts

Which connectors are you talking about? Also, 80 has 5v across the coil, and is closing, and SR81 is 12v and is not closing. I think you have it backwards.

Look at your post #4. Relay SR81 needs the 12V for the coil to operate.
When SR80 is on it provides the 120VAC to the bridge rectifier to give the DC Voltage to run the 18V/12V switching power supply section.

[jhbox]

Re: Toshiba 55SV670U No standby light with 5 standby volts

Ah, I got you, pardon me.

I observed an odd behavior just now. On POW_SIG, I am getting a quick reading when I unplug the tv from ac power at the wall. What would cause that?

[jhbox]

Re: Toshiba 55SV670U No standby light with 5 standby volts

Any ideas? budm? R_J? Anyone?