Samsung PN60E530AFXZA Pink Banding Issue

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dparker11818
    New Member
    • Jan 2016
    • 4
    • USA
    #1

    Samsung PN60E530AFXZA Pink Banding Issue

    Hello guys, I'm having some trouble with my Plasma and not sure exactly where to go next. I have checked the VS, VA, VSCAN, and VE voltages and as long as there is a darker picture on the screen all is well. As soon as a scene shows up where there is a lot of brightness it starts this pink flickering and I can sometimes change the channel and change it right back and the flickering will stop for a while or if the screen goes to a darker scene it will stop. When the flickering goes on the VS voltage jumps all around from 211, to 198, back to 208, down to 196, back and forth. Not stable at all. The problem has gotten worse over the last week and I just don't want to waste anymore money as I have already replaced the Y-Main and the Logic board due to two other separate issues. Any help would greatly be appreciated! Here's a video of exactly what my TV is doing. Thanks!

    https://www.youtube.com/watch?v=Tv8ErdUkJ-Q
    Tags: None
    • dparker11818
      New Member
      • Jan 2016
      • 4
      • USA
      #2
      Re: Samsung PN60E530AFXZA Pink Banding Issue

      Oh and one other thing I have noticed is that I can adjust the cell light up and it gets way worse! To the point it shuts the screen off but there's still sound. Adjusting the cell light down does help with the flickering but it's still somewhat there during bright scenes. Thanks again!

        Comment

        • gavric
          Senior Member
          • Jun 2011
          • 65
          #3
          Re: Samsung PN60E530AFXZA Pink Banding Issue

          You have power supply issue, not being able to produce stable VS voltage to Ysus.

          I am seeing same thing but not to that level you got it. I got non working 60 inch samsung 3d tv with dead power supply. got power supply rebuild kit from ebay and fixed it. Noticced pinkish images, I raised VS voltage as high as it can go -about 213 and it stays there solid but still see little pinkish on white screen images. No flashing here. Some say its just screen defect with samsung plasma screens.

            Comment

            • dparker11818
              New Member
              • Jan 2016
              • 4
              • USA
              #4
              Re: Samsung PN60E530AFXZA Pink Banding Issue

              Originally posted by gavric
              You have power supply issue, not being able to produce stable VS voltage to Ysus.

              I am seeing same thing but not to that level you got it. I got non working 60 inch samsung 3d tv with dead power supply. got power supply rebuild kit from ebay and fixed it. Noticced pinkish images, I raised VS voltage as high as it can go -about 213 and it stays there solid but still see little pinkish on white screen images. No flashing here. Some say its just screen defect with samsung plasma screens.
              That's is what I was thinking as well, just wanted some verification so I didn't waste money on the wrong thing. Thanks for the reply!

                Comment

                Previous template Next

                Related Topics

                Collapse
                • Kjell
                  Samsung Series 9 - BIOS issue
                  by Kjell
                  After installing Linux, I can no longer enter the BIOS of my Samsung Series 9 (NP900X3C) laptop. When pressing [F2] during boot I simply get a black screen. Same thing when pressing [F10] and choosing "Setup" from the "App Menu" tab. Apparently this is a relatively common issue with Samsung laptops of that generation, but unfortunately i haven't been able to resolve the issue (yet).

                  Things i've tried so far; reinstalled Windows 10, checked for redundant boot entries, tried to factory reset using the emergency keyhole, attempted to clear the NVRAM by physically...
                  08-01-2025, 09:15 AM
                • Document Archive
                  Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
                  by Document Archive
                  This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
                  09-07-2024, 05:50 AM
                • Nairolf
                  Samsung DM32D – Red LED blinks 5 times, won’t start (possible mainboard issue)
                  by Nairolf
                  Hello,

                  I have a Samsung DM32D display.
                  When I try to power it on, the red LED blinks 5 times and nothing happens—the unit won’t start.

                  Here’s what I have tried so far:
                  1. Disconnected the cable between the mainboard and the power supply → the backlight turns on.
                  2. Disconnected the main T-CON ribbon cable → same issue as before, the LED still blinks 5 times.
                  3. Disconnected one of the two T-CON ribbons to the panel (tested each one separately) → same issue, the LED blinks 5 times.

                  From these tests, I suspect the problem might be on the mainboard. Could anyone...
                  3 Photos
                  Yesterday, 03:47 AM
                • Indie
                  Samsung TV LA46B550K1R flickering issue, so near yet so far
                  by Indie
                  Hi,

                  I have a samsung tv (2009, works well) apart from an imminent flickering issue for some time.

                  Model: LA46B550K1R
                  Model code : LA46B550K1RLXL
                  Ac:100-260 V 50-60Hz, 240W
                  Power supply circuit: BN44-00265B

                  I read through the forums and found other Samsung models both 46, 55 inches , old and new with similar issues. Two things stood out:
                  1. eco setting in tv was recommended to be switched off
                  2. Jumper number JP852 was recommended to be cut off.

                  Now before opening the tv i tried playing around with the...
                  09-24-2020, 01:44 AM
                • vincentedel
                  Samsung SyncMaster 740n Phase Control Issue
                  by vincentedel
                  Hello,
                  I'm having an issue with the Samsung 740n's phase control setting. When I use the automatic adjustment, it sets the value to around 54 (with a range of 0-100), and the picture looks clear and sharp. However, after some time—like after playing a game—the text starts to look blurry. When I auto-adjust again, it may increase the value to 80, and everything becomes sharp once more. Yet, after a while, whether it's a few hours or a day later, the same blurriness returns, and I have to adjust it again.

                  I'm using the Samsung 740n monitor drivers instead of the default plug-and-play...
                  04-22-2025, 12:33 AM
                • Loading...
                • No more items.
                Working...