hi everyone i got 32D1334DB toshiba with ves8315wndl-01 screen i need a firmware i got one from other forum it bring tv back on but screen must be different its all faded color i need a different firmware i would be really appericated thanks
-
-
Re: 32D1334DB software needed pls help urgent
anybody ? -
Re: 32D1334DB software needed pls help urgent
Firmware maybe set for different panel. Have you tried going into service menu and changing?I assume no responsibility for any stupid suggestions I might post.Comment
-
Re: 32D1334DB software needed pls help urgent
no i havent i cant even see screen all different color i need right firmware for my screen how can i change on service menu thanksComment
-
Hi all,
I picked up a Marantz NR1501 that the seller said did not produce any audio, but was starting up just like normal. This was indeed the case and the hunt for damaged components started.
After confirming all voltages and replacing all caps on this godforsaken HDMI-board I finally got sound from the AUX input, but all digital inputs are still dead.
The service menu shows no DSP version so I desoldered IC1604 that should have the serial flash DSP firmware on it and made two dumps that turned out identical.
The content of these seems to be useless as far... -
Hello,
I accidentally flashed the wrong firmware to my Lenovo Laptop Touchscreen. Now it is not recognized anymore in Windows 10. With Linux, I get the Device Listed as ELAN 04f3:000b USB device. I have modified the original Lenovo Flash Tool and tried other Firmware bin files but without success.
The screen is the WHQD version. Can anyone provide a firmware bin file to reflash the touchscreen controller? As it seems that the controller is in recovery mode.
Thanks in advance -
Hello!
I have a Felix TV that turns on, shows the "FELIX" logo then shows a "WISDOM SHARE" message and doesn't do or respond to anything else.
I'm assuming a firmware flash will fix it.
I can't find the firmware file though, anyone has it please? -
Hello,
I'm helping my brother to fix his Blomberg laundry dryer. He called a repair guy to have a look and the repair guy said the control board is faulty. They said the replacement board costs $400. Too expensive! 😨 My brother asks me to take a look. He has checked the door switch and thermal fuse, etc., and those seems fine.
After plugged to mains, there is no display. There is just a clicking sound from the buzzer, like one click per second. No other response.
I suspect the firmware inside the MCU (ATMEGA64A) got corrupted. Can someone in this forum by any chance provide... -
Hello.
i bought this Bird rework station but comes without software for pc. I cant find anywhere to download it and dont know the name of software.
Could anyone help me pls?
/Ken...
Comment