Hi all,
Anyone know where I can find the latest firmware download for a TX-32LMD70???
Thanks
Anyone know where I can find the latest firmware download for a TX-32LMD70???
Thanks
-
I Used a T48 and RCUnlocker to remove password from the BIOS on a previously fully functional HP ProDesk 600 G6 Mini. Everything went very smoothly and I was able to boot the machine and install an OS. I then unplugged the machine and put it on the shelf for a week.
Now when I boot the machine, it does not POST. It plays 5.2 beep codes which are interpreted as:
I read the firmware with the T48 and it is different than what I flashed to it, so I flashed the unlocked firmware that I had saved. No change. I could use some advice on next steps to take.
... -
I'm trying to extract firmware from a GoXLR-Mini
https://www.tc-helicon.com/product.html?modelCode=P0DI7
I know it's not ideal, but I'm trying to extract the 64MB firmware without removing the chip. I've done this before, but I realize it's a case-by-case thing. Unfortunately, it seems this board's layout results in it getting powered by my SPI tool (Buspirate), failing extraction.
I believe the issue is the flash chip's HOLD pin unable to get pulled high, as the current for that pin dissipates elsewhere in the circuit. When I try to pull the HOLD pin... -
I have a Panasonc/vestel 55" 4K HDR TV and I need A copy of the Firmware.
I replaced the main board and someone gave me a 43" FINLUX firmware as it is a Panasonic Vestel version, it got the TV working again but the PIP will not work, I can only assume that it's because the Firmware thinks it is 43" tv?
I was greatfull for the TV to be workng again and it's been okay, but now I want to get it set up correctly.
If anyone has a copy of the firmware I need PLEASE help me out and send me A copy.
Greatfull for any help.
...01-11-2022, 07:44 PM -
Hi guys.
I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.
So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
Got New chip and writes good.
THE PROBLEM...
It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.
Does anyone have a Good Firmware I can have?... -
Hello friends,
I need the latest firmware for Synology DS109.
The filename is DSM_DS109_3259.pat (about 170MB).
Umpossible to download from Synology, because their support for old devices is discontinued as of 2023-05-31.
Please does anybody have a backup?
Many thanks in advance.