Panasonic TC-P50G20 - 13 Blinks / No Video

[ThinkItShapeIt]

When I power on my G20, the power LED blinks and there is no video. TV was working fine, powered it off and then back on an hour later only to find it no longer works.

The blink code is 13. I checked the trouble shooting guide for the 2010 G20 series [13th generation] and the blink codes only go up to 12.

Can anyone help me understand what 13 blinks indicates [other than my TV isn't working].

Thanks in advance,
Adam

[tw2005]

Re: Panasonic TC-P50G20 - 13 Blinks / No Video

Mainboard most likely, PTS Electronics rebuild

[ThinkItShapeIt]

Re: Panasonic TC-P50G20 - 13 Blinks / No Video

Thanks for the quick reply. When you say mainboard, is that the A board? I don't see mainboard referenced anywhere in the troubleshooting guide.

Thanks again!

[tw2005]

Re: Panasonic TC-P50G20 - 13 Blinks / No Video

yes mate, usually I say A-board and then people go is that the mainboard.

[ThinkItShapeIt]

Re: Panasonic TC-P50G20 - 13 Blinks / No Video

Thanks for the help. A PTS rebuild on the mainboard [A-board] did the trick.