philips 42PF5320/10 no start up

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • joe-joe
    Member
    • Aug 2016
    • 37
    • Belgiรซ

    #1

    philips 42PF5320/10 no start up

    my plasma tv philips 42PF5320 doesn t start up
    it has the known samsung power supply
    i replaced the 2 cap s from 3300 uf already, no resolts
    all the fuses ,on all the boards are ok
    when i turn it on,you hear the relay klikking,the 2 green leds ,on the right off the under side off the power supply are lightning for a few seconds ,the on the left ,above ,on the power supply ,there is a green led ,that blinks 8X ,over again
    no va or vs !the 5V comes up for a few seconds ,than falls down!
    any idees !!??
    can i unplug the x en y sus boards ,and measur then ,to find out iff the power supply is working !?
  • joe-joe
    Member
    • Aug 2016
    • 37
    • Belgiรซ

    #2
    Re: philips 42PF5320/10 no start up

    i found out that when i disconnect cn 8006 ,the 5V and the VA=70 V is there and the 2 green led s keep burning
    the X and Y sus board seem to be ok!

    Comment

    Related Topics

    Collapse

    • Tynan Dill
      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
      by Tynan Dill
      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

      Upon bringing it home and plugging it up, it showed a standby light.

      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

      The screen seems to blackout and stay black, but with a flashlight I can see the display.

      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

      Assuming...
      11-22-2024, 01:46 PM
    • sam_sam_sam
      Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
      by sam_sam_sam
      I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

      One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
      03-31-2024, 02:12 PM
    • Document Archive
      Philips TV Power Supply LED Driver MSD3463-T8C2 Schematic
      by Document Archive
      Philips TV Power Supply LED Driver MSD3463-T8C2 Schematic...
      11-06-2024, 03:47 AM
    • sam_sam_sam
      Modification to a ZD-987 desoldering/soldering station using a external switching power supply
      by sam_sam_sam
      I have been working on this concept for quite some time now with limited success but recently I found a switching power supply that is setup for the voltage that this soldering station needs to operate at however it also needs part of the secondary circuit from the original switching power because you need several voltage rails

      I once tried to get a ZD-915 desoldering station to work on a 18 volt battery power supply but unfortunately things did not go well but I did find a work around but I might try this idea again but going at a little differently more about this another time...
      07-01-2024, 06:34 AM
    • jimjoe123
      LCD TV Green/Pink screen problem
      by jimjoe123
      I have a Dick Smith 37" LCD TV, Model GE6804. I am using it as PC extended monitor only.

      Problem is while watching tv, I hear a semi loud click(like a electrical breaker tripping due to overload, just sound like it but no actual electrical overload), then screen is covered with green or pink. I can still see the original picture image but overlayed by green or pink. See attached images. Pink.jpg is what I see, and Normal.jpg is before green or pink screen, What I captured was pink screen, but about 80% of time it's green and 20% of time it's pink.

      Then each time...
      02-23-2020, 01:29 AM
    • Loading...
    • No more items.
    Working...