Hello,
I recently acquired three Blackmagic Design Hyperdeck Studio Pros and two Hyperdeck Studio Pro 2s from Craigslist (for free, oh yeah!) with various issues. A few of them are simple enough to diagnose, corrosion on HDMI port which will require a replacement port, bad power supply, etc. but there are a few that I can't seem to figure out (good power supply, but apparent short somewhere on the board, and then there is one that will not boot but the fan spins up and a red LED appears on the main board). I have done a bit of research on the Googles, but there doesnt appear to be much information on these devices out there. I am hoping you guys can help out. If anyone knows of any resources or has had any experience in repairing these, please let me know. I am very interested in getting a few of these up and running.
Any help or guidance is appreciated.
I recently acquired three Blackmagic Design Hyperdeck Studio Pros and two Hyperdeck Studio Pro 2s from Craigslist (for free, oh yeah!) with various issues. A few of them are simple enough to diagnose, corrosion on HDMI port which will require a replacement port, bad power supply, etc. but there are a few that I can't seem to figure out (good power supply, but apparent short somewhere on the board, and then there is one that will not boot but the fan spins up and a red LED appears on the main board). I have done a bit of research on the Googles, but there doesnt appear to be much information on these devices out there. I am hoping you guys can help out. If anyone knows of any resources or has had any experience in repairing these, please let me know. I am very interested in getting a few of these up and running.
Any help or guidance is appreciated.
Comment