Samsung PN64E533D2F

[krygods]

Re: Samsung PN64E533D2F

Here's a picture with XM808 and XM800 removed.

[budm]

Re: Samsung PN64E533D2F

It goes to lots of places, this is going to be real difficult works.
BTW, both of them have the same P/N for sure?
I still do not understand why the STBY has that switched device in the first place for the STBY output.

[krygods]

Re: Samsung PN64E533D2F

I see, well if there is anything that I can do that would make the job easier let me know.

I've seen the option to have the board repaired by someone else cost is about $80, but unfortunately I'm disqualified due to the poor work the previous owner left me with.

[krygods]

Re: Samsung PN64E533D2F

Better pictures of that section

[budm]

Re: Samsung PN64E533D2F

As you can see it goes to two jumpers which are then connected to a bunch of other parts, also to the diodes, etc.
The diagram is needed to be drawn up during the tracing, plus need to know what the components are, I.E. NPN Transistors, PNP Transistors, DIODES, ZENER DIODES, ETC.

[krygods]

Re: Samsung PN64E533D2F

I didn't see the edit from #22, yes both are the same part number

[krygods]

Re: Samsung PN64E533D2F

Here are the markings for some of the parts

QM802 - ZG
QM804 - HP
ZDX804 - Z8
ZDX807 - I can't read this one

[Acts238]

Re: Samsung PN64E533D2F

I have the same problem do you know where to buy a new power supply board for the Samsung plasma pn64e533d2f

[martino]

Re: Samsung PN64E533D2F

Did you get it fixed krygods? I'm in the same boat atm,pretty much exact same readings

[HS13]

Re: Samsung PN64E533D2F

Here Acts238
http://www.samsungparts.com/Products...el=PN64E533D2F