Re: e701i-a3 no picture but backlights
Thanks for the great post have read it several times now, but I do have a question in hopes I can figure this out. So after purchasing a new TCON board with both bottom ribbon cables disconnected on the sides I'm just getting vertical lines that do move with menu button and I'm guessing the V logo when starting up but no actual picture. I did connect the bottom right cable and had to replace the coxa chip so before I do anything again this is the point I'm at.
First photo is when turning on (logo I believe)
Second when hitting menu/input.
Thanks for the great post have read it several times now, but I do have a question in hopes I can figure this out. So after purchasing a new TCON board with both bottom ribbon cables disconnected on the sides I'm just getting vertical lines that do move with menu button and I'm guessing the V logo when starting up but no actual picture. I did connect the bottom right cable and had to replace the coxa chip so before I do anything again this is the point I'm at.
First photo is when turning on (logo I believe)
Second when hitting menu/input.
Comment