hi everyone had a few caps blown on the powerboard a while ago replaced them all was good but now the remote wont work to change channels etc ,ive changed remotes batterys and checked that the ir is working using my phone camera ive even replaced the ir reciever in the tv but it wouldnt work so ive been using the buttons on the tv i moved the tv as i was painting and when it was put back and used the remote worked for a short time a few minutes then stopped working again any ideas to solve this issue? thanks
Announcement
Collapse
No announcement yet.
toshiba 40bv700b remote control issues
Collapse
X
-
Re: toshiba 40bv700b remote control issues
I would at least try another remote or Universal remote first.Never stop learning
Basic LCD TV and Monitor troubleshooting guides.
http://www.badcaps.net/forum/showthr...956#post305956
Voltage Regulator (LDO) testing:
http://www.badcaps.net/forum/showthr...999#post300999
Inverter testing using old CFL:
http://www.badcaps.net/forum/showthr...er+testing+cfl
Tear down pictures : Hit the ">" Show Albums and stories" on the left side
http://s807.photobucket.com/user/budm/library/
TV Factory reset codes listing:
http://www.badcaps.net/forum/showthread.php?t=24809
Comment