Vizio vp422hdtv10a turns on, no video or sound

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mattd1979
    Member
    • Apr 2014
    • 30
    • USA

    #1

    Vizio vp422hdtv10a turns on, no video or sound

    When I press the power button the Visio name switches from amber to light blue but there is no picture or sound. I pulled the back panel off to get readings at the PSU and found that Va=111.4 V(suppose to be 54 V) and Vs=436 V(Suppose to be 207 V) with the power on. I couldn't find Vsc or Ve to take their readings.
  • mattd1979
    Member
    • Apr 2014
    • 30
    • USA

    #2
    Re: Vizio vp422hdtv10a turns on, no video or sound

    Anybody have any ideas? Would it be worth replacing the power supply to see if that takes care of the problem? The voltages are around double what they are suppose to be on the two that I could find.

    Comment

    Related Topics

    Collapse

    • soeren
      A2442 - No sound over internal speakers and no video playback
      by soeren
      I am facing a strange issue, I don't have any sound over my internal MacBook speakers and also the video won't start. If I change to my head speaker or via HDMI (speaker on my external Display) the sound works over the head speaker or Display and also the video starts (ex. youtube).

      All happened after the battery ran out of power overall several days when I was on vacation.

      I tried to remove the battery and then reconnected the battery, and then the MacBook Pro 14 2021 won't accept any power from my power socket. Then I removed one speaker, connected again the battery...
      07-26-2024, 01:24 AM
    • JRade
      Audio video receiver KENWood KR-V990D,no sound
      by JRade
      When I select the FM receiver, I find a radio station, the sound is heard on REC OUT(L,R), REC TAPE1(L,R),REC TAPE2(L,R) on high-ohm headphones, the sound regulation does not work.
      The output reacts when I connect the record player to PRE OUT FRONT L, the sound is heard in the speaker but the sound regulation does not work. Then it does not matter what I chose on the front selector.
      I replaced the capacitor C303/0.047F, nothing changes.
      I'm asking for help, what should I do next?
      Thanks in advance!...
      08-05-2025, 10:23 PM
    • FrancescoV
      Onkyo HT-R390 no sound output, video output ok
      by FrancescoV
      Good morning everyone,
      I'm trying to repair an onkyo ht-r390 that has no sound output, despite the volume being at maximum, the rest seems to work; the video output signal (coming from an hdmi input) is present, but the audio is absent. Similar situation if I send an audio signal from any input I have no output.

      The firmware reported is the following:
      M:1.00/11107BLP
      D:?.??/????????
      O:1.00/11107AL

      The DSP firmware given the question marks seems corrupt.

      On the BCHDM-0678 - 25140678 - QPWBCHDM0678A0 board the chip that usually seems...
      05-11-2025, 02:59 AM
    • Document Archive
      HP EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera EliteDesk 800 i7-7700 Specification for Upgrade or Repair
      by Document Archive
      This specification for the HP EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera boardview and EliteDesk 800 G3 + GoPro HERO6 Black 4K Ultra HD Video Camera schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our...
      09-12-2024, 02:00 PM
    • JaquesPratt
      Vizio D32f-E1 Powers on, has backlight, won't boot/no logo, no menu or video
      by JaquesPratt
      I have a Vizio D32f-E1 LCD TV that does NOT have a TCON board.

      This TV recently went through some 'death throes' and now won't boot. The first problem that began to manifest was while watching tv, the screen would 'freeze', and the image would dim over a few seconds until it was very dark. HOWEVER, the audio of the show would continue as normal. I could power off the TV for 5-20 seconds, power back on, and the video would be normal. This would occur 1-3 times when the TV was first started, and would not happen again after the TV was 'warmed up'. Not ideal, but this glitch was manageable....
      07-16-2024, 01:04 AM
    • Loading...
    • No more items.
    Working...