Hi, I was recently given a tv by a friend, the original fault was it wouldn't turn on and just flashed the red led on the front, I unplugged the tcon and the set fired up so i ordered a new tcon, When it arrived it had a different connector than the the original board so i used another cable i had lyin about to connect the tcon to the main board, Now the set works but has a slight offset split down the middle and another line down the right hand side, Its going to be used as a security monitor so it might be ok as it is but just asking here first incase its an easy fix via the service menu, Heres a video of the fault.
http://tinypic.com/r/308zgc3/8
http://tinypic.com/r/308zgc3/8
Comment