toshiba tl46963 help! led 3d tv

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • stu76
    New Member
    • Jun 2012
    • 2
    • ashford kent
    #1

    toshiba tl46963 help! led 3d tv

    can anyone help me out on this set please asap.

    toshiba 46tl963b 3d led tv.
    was working fine, turned on 3d then picture went off and only have sound.

    did have backlight on then no picture but have sound, now only have the backlight come on for a second then goes off, checked my volts around the psu to the inverter etc, have 24v, got my psu supplies 24v/5v/etc all ok, missing the 5v on a test point going to the t-con board but prob a ribbon connection going from and 2 mainboard to t-con.

    set is running but with no backlight on or picture but may have sound still.
    its driving me nuts, anyone have any ideas please?

    thanks alot.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • iglitare
      Sony KD-75XF9005 grey Picture but Sound. TCON or panel?
      by iglitare
      Hi,

      i want to repair a Sony KD-75XF9005 TV that initially only showed a grey picture.
      Backlight seems to work, Sound (Setup menu after reset) works.
      If i dissconnect the left FFC cable from TCON to panel i have half a screen on the right. If left cable is connected always only the grey screen.
      Interchanged the cables, its always only the right side that is working. Always grey if left side is connected.
      With my small knowledge i would think at least the cables are good.

      Can this happen because of a bad tcon board?
      Or is it always a bad/shorted...
      09-04-2025, 07:13 AM
    • TR103
      Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
      by TR103
      Hi, I have a Samsung UE50TU with:
      - sound and backlight, but no picture
      - when it arrived, it had a picture for a few seconds
      - it keeps rebooting
      - without ribbon cable between the two panel boards, it does not reboot but I have no picture
      - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
      - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

      - without cable between mainboard and lcd panel and with a jumpered...
      01-22-2025, 04:12 PM
    • jord4231
      Toshiba 37AV500A Regza TV good power supply no sound no picture
      by jord4231
      Hi Everyone,

      I'm working on a Toshiba 37AV500A Regza TV.

      The issue:
      TV was working picture and sound went out. Green stand by light stayed on, It will respond to the power button being pressed (goes in and out of standby)
      The TV will very intermittently work for around 40 mins then stop. This doesn't seem to matter if its hot/cold unplugged for a while etc.


      I checked the PSU voltages and everything looked good.
      No bulging caps or signs of heat.

      24v aud = 24.41v
      12v = 11.98v
      5v = 5.062
      p_o/f = Goes high...
      03-29-2022, 09:21 PM
    • Ierwin
      Samsung UE60KU6079 backlight okay mainboard responsive, no picture, no sound
      by Ierwin
      Hello everyone,
      Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
      The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
      He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
      I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
      Anyway I still fully expect that there has been something seriously damaged...
      05-13-2025, 03:31 PM
    • jchang
      Samsung UN70NU6900F no picture and no sound
      by jchang
      Hi all

      I was just given a Samsung TV with the issue. I read various threads and videos and attempted the ribbon tape method to gain an image, but no luck.



      Symptom:
      No picture no sound.
      When I plug in the power cord, Backlight LED turns on for a half second and then turns off. The red LED next to the power button located center bottom flashes 2 or 3 times. When the power button is pressed after, it does the same thing.
      No sound at all.



      What I tried:
      1. I tried unplugging the left or right ribbon...
      01-09-2023, 06:28 PM
    • Loading...
    • No more items.
    Working...