Samsung PN51D490A1D stuck pixel row help

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • NoDoz
    New Member
    • Feb 2015
    • 3
    • USA

    #1

    Samsung PN51D490A1D stuck pixel row help

    I'm having a "stuck pixel" issue on an out-of-warranty Samsung PN51D490A1D. It appears as though two pixel-wide vertical rows (separated by one working vertical row) are "stuck" or missing a color field. The issue presented itself one day and did not get better or worse for months. I ended up picking up another TV around the holidays but would like to attempt to fix this if it were a feasible thing to do.

    I tried disconnecting every ribbon cable and cleaning them with isopropyl alcohol (a few times) with no luck. I'm mostly just wondering if this is for sure a panel issue, or if a certain board tends to fail. It seems like board failures present symptoms far worse than this, but electronics repair isn't exactly my specialty so I only know what I've read thus far (which has been far more people with issues than solutions.)

    Any thoughts? I read this thread about running the diagnostics, and have to dig a jumper out of my box of spare computer parts, but I thought that starting a thread in the meantime would be helpful in case it's an "obvious" panel issue.

    Pics from another forum from a user with the same issue are posted below.



    Last edited by NoDoz; 02-22-2015, 09:36 AM.
  • NoDoz
    New Member
    • Feb 2015
    • 3
    • USA

    #2
    Re: Samsung PN51D490A1D stuck pixel row help

    As an additional note, I ran through the diagnostic tests in this thread. It ran through the color slides and really didn't show me much, but I guess if a board was bad it may have been more obvious. I assume it to be a cable or the panel itself at this point, but I don't know where to start with cable diagnostics.

    Comment

    • Alastair E
      Chief Womble
      • Mar 2013
      • 1963
      • U.K.

      #3
      Re: Samsung PN51D490A1D stuck pixel row help

      COF Chip, Tab or Panel--Unrepairable sadly.
      TELEFIX

      How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
      http://www.irf.com/technical-info/appnotes/an-1088.pdf
      PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM!

      Comment

      Related Topics

      Collapse

      • Document Archive
        Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
        by Document Archive
        This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
        09-07-2024, 05:50 AM
      • vincentedel
        Samsung SyncMaster 740n Phase Control Issue
        by vincentedel
        Hello,
        I'm having an issue with the Samsung 740n's phase control setting. When I use the automatic adjustment, it sets the value to around 54 (with a range of 0-100), and the picture looks clear and sharp. However, after some timeβ€”like after playing a gameβ€”the text starts to look blurry. When I auto-adjust again, it may increase the value to 80, and everything becomes sharp once more. Yet, after a while, whether it's a few hours or a day later, the same blurriness returns, and I have to adjust it again.

        I'm using the Samsung 740n monitor drivers instead of the default plug-and-play...
        04-22-2025, 12:33 AM
      • Manucsl
        QE65Q800TATXXC Samsung TV Issue
        by Manucsl
        Hello.

        My TV is a QE65Q800TATXXC Samsung TV.

        Issue : When you plug the 220V, voltages are OK on the power board and you can hear the click from the relay, but TV is not starting when power button is pressed. Red led is blinking when you press power button. But no images or sound ( Back-light is off )
        Then if you disconnect the cable from the main board to the power supply, the TV back-light turns on.
        Any ideas to check would be very appreciated 😊

        After reading some posts on this forum, I suspect an eeprom issue so I bought a CH341A to dump...
        02-19-2025, 07:47 AM
      • rumi409
        LG OLED C1 Pixel Cleaning Made Picture Worse
        by rumi409
        ​​​​​​ Hi,

        I'm trying to resurrect a LG OLED C1 TV that has some panel banding. I used the TCON error bypass to get a picture. I was able to update the firmware as well. But when I performed a pixel cleaning to try to get the banding out, it made the image significantly worse. I tried to undo the effects of the pixel cleaning by performing a factory reset and IN_Stop, but that didn't work. Any way to reset pixel cleaning data?...
        11-15-2024, 01:09 AM
      • FourRunner
        Display issue Samsung TV UA65JS9000W
        by FourRunner
        I purchased a used Samsung TV model UA65JS9000W recently knowing it had an issue with the screen. When switched on the picture was bright both sides of the screen but a little darker in the middle of the screen. Thinking this was the back lights (side mounted LCD strips) I replaced these, however the issue is still there. I am now thinking it may be a TCOM issue, but am not sure, any advice on this would be appreciated. Also whilst changing out the back lights I noticed the the thick clear plastic sheet (maybe 1.5 to 2mm thick) below the diffusers there is cracking (up to 75mm) on the sides and...
        10-03-2024, 07:05 PM
      • Loading...
      • No more items.
      Working...