Announcement

Collapse
No announcement yet.

Samsung PN58C680 black blobs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: Samsung PN58C680 black blobs

    OK new zsus came in. Same issue. I notices I can get some of the maldischarge out by turning up the VB slightly. But still not right. Oddly I noticed the power supply control for vs is labeled max 210,min 205 where is the panel us rated normal operating voltage of 210.. Maxed out vs is 218. Movie mode still fades out to nothing. YSUS ordered now. Their cheap anyway. 20 bucks a pop. Think if all else fails I'm going to give up and leave VS maxed and watch her slowly die. Unless I can safely modify the power supply and ramp up vs a little more. Wonder how this would play on sustain boards and panel?

    On a side note I'm a little frazzled. Our company that has been living here the last month die to financial hardship, their little boy started whacking the other 58 Samsung plasma I repaired that I was selling today with my sons plastic hammer. Cracked the screen in 6 different areas. Nice little star shaped cracks. So upsetting. All when I was at work.
    Last edited by freakaftr8; 02-14-2015, 12:51 AM.
    Did I leave the soldering iron on?

    Comment

    Working...