Samsung LE32R86BD

[ginopilotino]

It seems the same as LE32R87BD and LE32R88BD. The mainboard is BN41-00813B-MP1.0 - BN94-01327A.
I found a BN41-00813E-MP1.0 for a 40". The tv now powerup, but I got vertical color lines. How could I do to make it works?

[sordids999]

Re: Samsung LE32R86BD

pictures ?

[ginopilotino]

Re: Samsung LE32R86BD

[ginopilotino]

Re: Samsung LE32R86BD

the board from the LE40R86 is an BN94-01472M

[Kilroys]

Re: Samsung LE32R86BD

t-con voltage for LE40Rxxx is 12V
unless the panel is T400XW01 V1
but for all LE32Rxxx models it is 5V
Measure the t-con voltage, must be 5V
otherwise there is a chance that the t-con is broken

[ginopilotino]

Re: Samsung LE32R86BD

Is there a way to set the output of the main to 5V?

[ginopilotino]

Re: Samsung LE32R86BD

Near the tcon connector the 40" version doesn't have the c1156 the is the in the 32" version
And yes, 12V on 40" main, don't know on 32", mine is broken.

[Kilroys]

Re: Samsung LE32R86BD

Look at t-con voltage at Factory Option-32 you see all is 5V.
At 40" i couldnt find BN94-01472M but as you said,
it was 12V.
No I dont know if there is a way to change to 5V.

[ginopilotino]

Re: Samsung LE32R86BD

Yes, mine is LTA320WT-L07, 5V. I don't think 5V/12V is set by firmware.

[ginopilotino]

Re: Samsung LE32R86BD

Does combination panel/main is fixed? Could I mix 1121 or 1320 with mine?

[Kilroys]

Re: Samsung LE32R86BD

Sorry. I dont know, so now I am guessing.
With all those mainboards it seems that the panel/mainboard is fixed.
Perhaps someone else in the Forum has an answer?

[mrflab]

Re: Samsung LE32R86BD

Hi to everybody. First of all sorry for my english, I'm Italian....you know.......
I have a problem with this le32r86bd that suddenly run in slow motion. In italian forum someone say that the problem is on TCON, others say that i must replace the panel ( very expensive solution). I'm looking for a cheaper solution , can anyone help me ?