Philips 42PFL9603 2 Blinking leds.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Moreno83
    Badcaps Legend
    • Jun 2014
    • 2008
    • The Netherlands

    #1

    Philips 42PFL9603 2 Blinking leds.

    Hi People ,

    I got a Philips 42PFL9603D and when i turn it on the power led blinks 2 times.
    I bought this tv from a dude that probably tried fixing this tv by himself ( which i found out later ).

    I already tried a reset but it didn't work.
    On first sight the power board seems to be ok , no bad caps or soldering.
    The main board however has a few issues. When i first opened the back of the TV i though that a few caps were burned out but later i found out that that guy tried to desolder/solder some caps.
    I have NO idea if the caps on the main board are the original caps but the guy really f*cked the board up. ( bad soldering , some pads almost gone )

    The serial nr on the main board = 3104.303.51026 3104.313.62146

    I couldn't find a schematic for this tv on the internet so i can't check the original values. Can someone tell me the values? Im talking about the small grey capacitors. Values of the caps 3x 250/25v and 2x 10/4V.

    So basically my first question is , what are the values and what causes the 2 blink error?

    Thank you for the help and sorry for my english!


    Mark
    I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!
  • kasfamily
    Badcaps Veteran
    • Aug 2014
    • 765
    • Russia

    #2
    Re: Philips 42PFL9603 2 Blinking leds.

    Сhassis Q529.1E the error 2 times - probably defective SSB

    Comment

    • Moreno83
      Badcaps Legend
      • Jun 2014
      • 2008
      • The Netherlands

      #3
      Re: Philips 42PFL9603 2 Blinking leds.

      Thanks a lot for the reply! Any chance how i can figure out what causes the problem?
      I only repair Panasonic plasma tv's! Currently owning a TX-P55VT50 and still searching for a ZT60!

      Comment

      • kasfamily
        Badcaps Veteran
        • Aug 2014
        • 765
        • Russia

        #4
        Re: Philips 42PFL9603 2 Blinking leds.

        Show photo SSB and PSU board

        Comment

        Related Topics

        Collapse

        • Tynan Dill
          Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
          by Tynan Dill
          I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

          Upon bringing it home and plugging it up, it showed a standby light.

          I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

          The screen seems to blackout and stay black, but with a flashlight I can see the display.

          With my Playstation 4 connected via HDMI, and running a game I can hear sound.

          Assuming...
          11-22-2024, 01:46 PM
        • m1ch43lzm
          HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
          by m1ch43lzm
          Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
          Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
          05-12-2025, 08:37 PM
        • tuner2000i
          Philips 65PUS8518/12 distorted image after main board replacement
          by tuner2000i
          hello everyone,

          I don't normally do tv repairs but this is a case with my personal TV which got fried together with many other electronics in my house after a thunderstorm.

          The TV is a Philips 65PUS8518/12 which had no power. I measured and concluded that the main board was probably fried through ethernet or hdmi. I found a board with same number 715GD328-M0F-B00-005Y (I had G) but from a 55PUS8518. The TV starts but the image is doubled, distorted. I need to set the panel code which is 016 according to the sticker on the back but I can not seem to do it.

          ...
          07-15-2025, 01:15 PM
        • howardc64
          TCL 55S425 few horizontal lines, potential failure on both side of panel/buffer board
          by howardc64
          All left and right refers to looking from rear of TV (or looking from front with TV upside down)
          • TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
          • Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
          ...
          Yesterday, 05:17 PM
        • spantor
          Activate power board Philips 40PFH40009/88 tv
          by spantor
          Hello partners.

          Could someone tell me how to make this Philips TV source work without the mainboard being connected? The model of the board is EAX65423701 (2.1) and the model of the Philips TV is 40PFH40009/88.
          The TV is dead, there is no standby light, however there is a voltage of 12v on the pins ( included 12v VAU ) and 3.2v on the PS-ON pin (see photo) when the power board is connected to the main board. If I disconnect both boards I only get 8 volts on 12v pins. I would like to rule out a fault in the main board by making it work, but so far no one has been able to tell...
          02-11-2024, 05:07 PM
        • Loading...
        • No more items.
        Working...