Vox 32ADS316B P50-2842TV8.0

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sigmeyer
    Senior Member
    • Feb 2020
    • 158
    • Serbia

    #1

    Vox 32ADS316B P50-2842TV8.0

    This TV would turn on its backlight on its own after a minute , it doesnt react to remote , i managed to connect to UART and it would give Errors with regards to mmc , you will see in the log. I tried the command realtek>factory reset , it tried to do it , but still hangs and gives about same errors with emmc . With mmc info command it would give me MLC: Device lifetime exceeded message... I attach the log here so make of it what you will. The EMMC is the toshiba THGBMNG5D1LBAIL , I have some similar or maybe different emmcs lying around , if anybody knows if they are interchangable , i could try to program it with the old firmware if its the emmc thats died...
    Attached Files
  • sigmeyer
    Senior Member
    • Feb 2020
    • 158
    • Serbia

    #2
    I took Emmc off and when I dumped it, he couldn't read the usredata.bin.
    Instead THGBMNG5D1LBAIL 4GB, I put the memory of the skynix H26M41204HPR of 8GB, and one colleague gave me DUMP. I soldered it and TV works without a problem, If someone needs a DUMP for VOX32ADS316B P50-2428TV8.0 you can ask or cu paint it so set up a link. Quite a light fix, and I didn’t know I could put on another memory but that’s what it’s all, I just watched the same package and the dump looks taken out with 8gb emmc because boot.bin was 4096kb and the original twice smaller
    it was the dead memory chip after all... solved..

    Comment

    Related Topics

    Collapse

    Working...